Maximum Output 600W

TERA-THL-300 is a high frequency motor spindle to realize max. output 600W

High stiffness Angular contact, spindle Ball Bearings.

The H/F/ Motor spindle uses a double pair of high stiffness Angular contact Ball Bearings. The arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting.

On-Piece motor and spindle construction

The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines.

Excellent Durability by air-cooling system

Air-cooling motor uses a small volume of air (300L/min) to prevent heat buildup and allow long, continuous operation.

Best for diameter drilling and milling

Less than φ3mm small diameter drilling and milling with extremely good surface finishes, using a high-speed motor.

Cooling Air

Clean dry air is required to cool the motor and protect the spindle from contaminants.
Please use a filter and regulator.
(Proper air pressure 0.3-0.4MPa) (Use Air Line Kit TPC (PC3A-03G))

Maximum Output 600W

TERA-THL-300 is a high frequency motor spindle to realize max. output 600W

High stiffness Angular contact, spindle Ball Bearings.

The H/F/ Motor spindle uses a double pair of high stiffness Angular contact Ball Bearings. The arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting.

On-Piece motor and spindle construction

The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines.

Excellent Durability by air-cooling system

Air-cooling motor uses a small volume of air (300L/min) to prevent heat buildup and allow long, continuous operation.

Best for diameter drilling and milling

Less than φ3mm small diameter drilling and milling with extremely good surface finishes, using a high-speed motor.

Cooling Air

Clean dry air is required to cool the motor and protect the spindle from contaminants.
Please use a filter and regulator.
(Proper air pressure 0.3-0.4MPa)
(Use Air Line Kit TPC (PC3A-03G))

Frequency Spindle

The High-Precision, High-Speed Built-in Motor enable you to use your exisitng equipment for a much larger variety of operations.
Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the THA240, THL300, THL240LS, TNA500

Frequency Spindle

Ideal use for on NC machines
Short Body, High Torque, High-precision machining spindles.
Prefect for Robotic applications, the short body makes it extremely adaptable.
Easily convert a single purpose machine into a multi-purpose machine.
Enhance the capabilities of existing equipment.
simple installation, just supply lubricated air.
Wide variety of configurations in the same diameter, so you can easily
interchange between high speed and high torque spindles with the same holder.
For space restricted installations there are different air input and exhaust configurations.
Flange type Frequency spindle / air bearing spindle makes mounting very easy.