- Touch panel color LCD screen - Precise control - 100 patterns (Total 2,000 segments, 100 SEG / PTN) - Temperature / humidity independent PID control - Various alarm functions - Digital input (DI) 4 contacts, digital output (DO) 12 contacts - Communication function (RS232 or RS485, selected by the suffix code)
Suffix code
Model |
Code |
Information |
TH300 |
|
|
Programmable Temperature&Humidity controller (DIN 96 × 96) |
Communication |
1 |
|
RS232C communication |
2 |
|
RS485 / 422 communication |
Language (optional) |
1 |
Korean and English (Standard type) |
2 |
English and Chinese (Simplified Chinese Characters) |
3 |
English and Chinese (Traditional Chinese Characters) |
Specification
Temperature sensor (Dry) |
RTP (Pt100 Ω) or 0 - 5 V DC ? 4 - 20 ? DC (external resistance 250Ω) ? Pt100 Ω (IEC 751) |
Humidity sensor (Wet) |
Sampling time |
500 ms |
Measurement range |
Temperature : -100.0 ~ 500.0 ? |
Humidity : 0.0 ~ 100.0 % RH |
Digital Input (DI) |
4 contacts (1a X 4) |
Display accuracy |
Temperature : ±0.2 % of FS Humidity : ±2 % of FS |
Insulation resistance |
500 V DC min 10 ? (between the primary and secondary terminal, between the primary / secondary terminal and earth terminal) |
Dielectric strength |
2500 V AC 50 / 60 ? (between the primary and secondary terminal) |
Ambient temperature |
0 ~ 50 ? |
Ambient humidity |
20 ~ 90 % RH (without dew condensation) |
Storage temperature |
-25 ~ 70 ? |
Vibration resistance |
10 - 55 ?, amplitude 0.75 mm, 3 directions 4 times, 5 min/cycle. |
Shock resistance |
147 ?, 3 directions 3 times. |
Dimension |
96(W) X 96(H) X 100(D) |
Weight |
approx. 582 kg (body + fastener) |
Power supply voltage |
100 -240 V AC, voltage fluctuation : ±10 % |
Power frequency |
50 - 60 ? |
Power consumption |
10 VA max |
Ambient temperature |
0 ~ 50 ? |
Ambient humidity |
20 ~ 90 % RH (No dew condensation allowed) |
Storage temperature |
-25 ~ 70 ? |
Vibration resistance |
10 - 55 ?, amplitude 0.75 mm, 3 directions for 4 times, 5 min/cycle |
Shock resistance |
147 ?, to 3 directions for 3 times |
Dimension |
96(W) X 96(H) |
Weight |
Approx. 850 g (included the weight of box) |
Screen rating |
TFT LCD (70.08 X 52.56 mm : 3.5") |
Number of Pixels |
320 X RGB X 240 |
Back light |
Edge Light LED B/L |
Back light life expectancy |
Approximately 40,000 hours |
Touch type |
Register type (4 wires) |
Language |
Korean/English, Korean/Chinese (Simplified Chinese Characters, English/Chinese (Traditional Chinese Characters). *selected by the suffix code |
Applicable rating |
EIA - RS232C, RS485/422 |
Max number of connection |
RS232C |
1 : 1 |
RS485/422 |
32 devices max (includes the master). ? address 1 ~ 999 |
Communication type |
RS232C |
Full Duplex |
RS485/422 |
2 wires type half duplex |
Synchronous type |
RS232, 485/422 |
Asynchronous mode |
RS232C |
Approx. within 10 m |
RS485/422 |
Approx. within 1.2 km |
RS232C, 485/422 |
9600 / 19200 / 38400 bps |
Data Length |
RS232C, 485/422 |
7/8 Bits |
Parity Bit |
RS232C, 485/422 |
NONE / EVEN / ODD |
Stop Bit |
RS232C, 485/422 |
1 / 2 Bit (s) |
Protocol |
RS232C, 485/422 |
PCLINK / PCLINK + CRC / MODBUS - RTU |
Response Time |
RS232C, 485/422 |
0 - 999 ms |
Control output (OUT) |
SSR |
ON : 24 V DC pulse voltage, OFF : below 0.1 V DC Pulse voltage(resistive load above 800Ω) |
Cycle time : 1 ~ 1000 sec |
Retransmission output (RET) |
Temperature |
4 - 20 ? DC (resistive load 600 Ω max) present value (PV), output amount (MV), set value(SV) ? by the internal selection |
Humidity |
Resolving power |
7000 max (regarding 4 - 20 ?) |
Renewal time |
500 ms |
Digital output (DO) |
Relay |
8 contacts (1a X 8 contacts) N.O : 30 V DC 5 A, 240 V AC 5 A |
Transistor |
4 contacts (Open collector output). 24 V DC 300 ? max |
Input |
Input compensation |
Temperature : -100.00 ~ 100.00 ? Humidity : -100.0 ~ 100.0 % RH |
Dry/wet bulb sensor compensation |
Compensate the difference between the wet and dry bulb sensor after removing the wit bulb sensor gauze. |
Scaling |
DC Voltage (V DC) : Input scaling depending on the range variation. |
Input filter |
1 ~ 180 sec |
Input break detection |
UP scale (in case of the RTD input), Operation stops when exceeding ±5 % of the range limit. |
Control mode |
Operation method selection |
Constant value control / program control selectable. |
Control action |
Pattern |
100 patterns (100 segments / 1 pattern) |
Segment |
2,000 segments max. |
PID group |
16 group (temperature 4 zones X humidity 4 zones) |
Auto tuning |
Auto tuning depending on the target set value. |
Proportional band |
0.00 ~ 600.00 ? (ON / OFF control when value is 0.00) |
Integral time |
0.00 ~ 6,000 sec (OFF state when time is set to 0) |
Derivative time |
0.00 ~ 6,000 sec (OFF state when time is set to 0) |
ON/OFF control |
Set the proportional band to 0.0 |
Direct/reverse control |
Depends on the direct/reverse action of control output. |
Hysteresis |
0.1 ~ 600 ? (with humidity, wet bulb temperature or replaced value) |
Retransmission Output |
Temperature?humidity |
4 - 20 ? DC select among the present value(PV), set value(SV), and output amount (MV) |
Scaling |
Automatically scales the high and low range (4 - 20 ? DC). |
Alarm setting |
Set alarm |
System alarm : 4 contacts. Alarm 4 contacts per pattern |
Alarm type |
High/low alarm, low deviation alarm and etc (20 kinds) |
Absolute alarm |
Temperature : -100.00 ~ 500.00 ? Humidity : 0.0 ~ 100.0 % RH. |
Deviation alarm |
Temperature : -600.00 ~ 600.00 ? Humidity : -100.0 ~ 100.0 % RH. |
Hysteresis |
Temperature : 0.0 ~ 600.0 ? Humidity : 0.0 ~ 100 % RH. |
Power backup memory |
Saving device |
Internal flash and FRAM, Temperature / Humidity each 86,400 point. |
Saving function |
Save and restore the program information and set value and save the temperature humidity set value and indication value |
|