Centco4-MLW

Centco4MLW

4 jaws chucks Ø 315 - 1400 mm

Indipendent self centering clamping in 2 axis
Weight-optimized chuck body
4 jaw

Closed Center Power Chucks

AN-D

INCH serration

AN-M

METRIC serration

High precision power chucks Ø 125 - 400 mm

Closed center
2 and 3 jaws (4 jaws only Ø 400 mm)

AL-D

INCH serration

AL-M

METRIC serration

High precision power chucks Ø 125 - 400 mm

Closed center
Long stroke
2 and 3 jaws (4 jaws only Ø 400 mm)

AN-C

Tongue & groove

High precision power chucks Ø 165 - 400 mm

Closed center
3 and 3 jaws (4 jaws only Ø 400 mm)

AP-D

INCH serration

AP-M

METRIC serration

High precision fully sealed power chucks Ø 170 - 400 mm

Closed center
2 jaws (only Ø 215-260) and 3 jaws
proofline® chucks = fully sealed–low maintenance

AP-C

Tongue & groove

High precision fully sealed power chucks Ø 170 - 400 mm

Closed center
2 jaws (only Ø 215-260) and 3 jaws
proofline® chucks = fully sealed–low maintenance

APL-D

INCH serration

APL-M

METRIC serration

High precision fully sealed power chucks Ø 215 - 400 mm

Closed center
Longstroke
3 jaws
proofline® chucks = fully sealed–low maintenance

APL-D

INCH serration

APL-C

Tongue & groove

High precision fully sealed power chucks Ø 500 - 1000 mm

Closed center
Long stroke
3 jaws
proofline® chucks = fully sealed–low maintenance

APL-C

Tongue & groove

High precision power chucks Ø 215 - 400 mm

Long stroke
Closed center
3 jaws
proofline® chucks = fully sealed–low maintenance

NT-C

Tongue & groove

High precision fully sealed power chucks Ø 170 - 400 mm

Centrifugal force compensation
Closed center
3 jaws
proofline® chucks = fully sealed–low maintenance

NT-D

INCH serration

NT-M

METRIC serration

High precision fully sealed power chucks Ø 170 - 400 mm

Centrifugal force compensation
Closed center
3 jaws
proofline® chucks = fully sealed–low maintenance

NTL-D

INCH serration

NTL-M

METRIC serration

High precision fully sealed power chucks Ø 260 - 400 mm

Centrifugal force compensation
Closed center - 3 jaws
Long stroke
proofline® chucks = fully sealed–low maintenance

NTL-C

LONG STROKE

Tongue & groove

High precision fully sealed power chucks Ø 260 - 400 mm

Centrifugal force compensation
Closed center - 3 jaws
Long stroke
proofline® chucks = fully sealed–low maintenance

NTL-D

INCH serration

NTL-C

Tongue & groove

High precision fully sealed power chucks Ø 500 - 1000 mm

Centrifugal force compensation
Closed center - 3 jaws
Long stroke
proofline® chucks = fully sealed–low maintenance

IN-D 500-800

INCH serration

IN-C 500-800

Tongue & groove

High precision power chucks Ø 500 - 800 mm

Closed center
3 and 4 jaws

IL-D 500-800

INCH serration

IL-C 500-800

Tongue & groove

High precision power chucks Ø 500 - 800 mm

Closed center
Long stroke
3 and 4jaws

IND-CP

INCH serration

MODULE 2 serration

High precision power chucks Ø 500 - 1250 mm

Closed center
Closed center
3 jaws

IN-D 3-6 JAWS

MODULE 2 serration

IL-D

Long jaw stroke

High precision power chucks Ø 660 - 2500 mm

Radial setting of jaws
Long jaw stroke
3 and 6 jaws (all diameters)

IN-D 4 JAWS

MODULE 2 serration

IL-D

Long jaw stroke

High precision power chucks Ø 1000 - 1600 mm

Long jaw stroke
4 jaws (all diameters)

IR-C Ø 660 - 2500 mm

Tongue & groove

High precision pull-down chucks Ø 160 - 400 mm

Pull-down effect of inclined master jaws
Closed center
3 and 6 jaws (all diameters)

IR-C Ø 660 - 2000 mm

Tongue & groove

High precision power chucks Ø 80 - 315 mm

Long stroke
Closed center
4 jaws (all diameters)

RAN

Tongue & groove

High precision power chucks Ø 160 - 400 mm

Large through hole
Tongue & groove master jaws
3 jaws

CL-C

Tongue & groove

CL-D

INCH serration

High precision power chucks Ø 80 - 315 mm

Large through hole
Closed center
2 jaws

Open Center Power Chucks

BH-D

INCH serration

High precision power chucks Ø 130 - 450 mm

Large through hole
2, 3 and 4 jaws

BH-M

METRIC serration

High precision power chucks Ø 130 - 450 mm

Large trough-hole
2, 3 and 4 jaws
130-165-210-250-315-320-400-450 sizes

BH-D BIG DIAMETERS

INCH serration

High precision power chucks Ø 500-800 mm

EXTRA large through hole
3 jaws

BHD-FC

INCH serration

BHM-FC

Metric serration

High precision power chucks Ø 165 - 630 mm

Large through hole
Large through hole
3 jaws

BP-D

INCH serration

BP-M

Metric serration

High precision power chucks Ø 220 - 320 mm

large through hole
3 jaws
proofline® chucks = fully sealed–low maintenance

BP-C

Tongue & groove

High precision power chucks Ø 220 - 320 mm

Wedge-bar design
3 jaws
proofline® chucks = fully sealed–low maintenance

BB-D

INCH serration

BB-M

Metric serration

High precision power chucks Ø 140 - 435 mm

3 jaws

HFKN-D/-M

INCH/ METRIC Serration

HFKN-C

TONGUE & GROOVE

High precision power chucks Ø 110 - 500 mm

Large through hole
3 jaws

HFKS-2G

INCH/ METRIC Serration

Wedge-hook design with centrifugal force compensation

High precision power chucks Ø 165 - 320 mm

Large through hole
3 jaws
Reduced weight

Centco4

INCH Serration

4-Jaw chucks Ø 210 - 400 mm

Independent self centering clamping in 2 axis
Centrifugal force compensation
4 jaws
Large through hole

Quick jaw change power chucks

KNCS-N Ø 140 - 630 mm

QUICK JAW CHANGE

Quick jaw change power chucks Ø 140 - 630 mm

Large through hole
High speed
High flexibility: jaws radially adjustable/reversible
3 Jaws

KNCS-N Ø 210 - 325 mm

QUICK JAW CHANGE

Quick jaw change power chucks Ø 210 - 325 mm

2 Jaws
Large through hole
High speed
High flexibility: jaws radially adjustable/reversible

KNCS-NB

QUICK JAW CHANGE

Wide master jaws

Quick jaw change power chucks Ø 210 - 800 mm

Large through hole
High flexibility: jaws radially adjustable/reversible
3 Jaws
Suitable to take any type of existing top jaws

KNCS-NBX

QUICK JAW CHANGE

Wide master jaws

Quick jaw change power chucks Ø 425 - 1000 mm

EXTRA large through hole
EXTRA long piston guide
High flexibility: jaws radially adjustable/reversible
3 Jaws
Suitable to take any type of existing top jaws

KNCS-2G

QUICK JAW CHANGE

Fully sealed

Quick jaw change power chucks Ø 170 - 630 mm

Large through hole
Protection against dust and swarf
High flexibility: jaws radially adjustable/reversible
3 Jaws

KNCS-NB-CL

CENTER LINE

Wide master jaws

High precision power chucks Ø 630

Quick jaw change
Large through hole
Radial fine adjustment
High flexibility: jaws radially adjustable / reversible

AP-RC

Quick jaw change

Tongue & groove

AP-RD

Quick jaw change

Serration

Quick jaw change high precision power chucks Ø 170 - 400 mm

Closed center
3 jaws
proofline® chucks = fully sealed–low maintenance

NT-RC

Quick jaw change

Tongue & groove

NT-RD

Quick jaw change

Serration

Quick jaw change high precision power chucks Ø 170 - 400 mm

Centrifugal force compensation
3 jaws, closed center
proofline® chucks = fully sealed–low maintenance

KIT-RR

Converts a standard chuck into a quick jaw change chuck

Available from 210 to 400

Available for inch or metric serration master jaws

For AP-BH-NT SMW-Autoblok’s power chucks
Easy coupling and uncoupling with spring-loaded button
Safety against accidental release
Suitable for manual and/or robotic use
Ready for a robotized change

NTL-RR

Quick jaw change

Long jaw stroke

proofline® chucks = fully sealed – low maintenance

High precision 3 jaw sealed power chuck Ø 260 - 400 mm

Costant gripping force with permanent grease lubrication
Long jaw stroke
Chuck body and internal parts case hardened
Center bore for coolant and/or air

APL-RR

quick jaw change

proofline® chucks = fully sealed – low maintenance

High precision 3 jaw sealed power chuck Ø 215 - 400 mm

Extra long jaw stroke
Costant gripping force with permanent grease lubrication
Center bore for coolant and/or air
Chuck body and internal parts case hardened
proofline® chucks = fully sealed – low maintenance

MANUAL JACK - MJ

Manual Jack to operate a power chuck

with Ø300-520 Plain Back

The large variety of SMW-Autoblok power chucks allow the customer to clamp the workpiece with the best chuck alternatives

Irreversible mechanism based on an operating screw driven by a worm gear
With spring energy storage for safe clamping
Sealed mechanism and constantly lubricated
Very low profile and possibility to integrate it in the machine pallet

Pull-down chucks / Compensating chucks / Indexing chucks / Shaft chucks / Column chucks / 6 jaw 2+2+2 chucks

TSF-C

Self centering

Floating jaws

TSR-C

Self centering

Rigid jaws

High precision pull-down chucks Ø 135 - 650 mm

Active pull-down
Tongue & groove
3 jaws

TSF-C

Self centering

Floating jaws

High precision pull-down chucks Ø 170 - 315 mm

Active pull-down
Tongue & groove
2 jaws

TSF-RM

Self centering

Floating jaws

TSR-RM

Self centering

Rigid jaws

Quick jaw change pull-down chucks Ø 170 - 530 mm

Active pull-down
Quick jaw change with pallets
Tongue & groove pallets - 3 jaws

TSF-CP

Compensating

Floating jaws

TSR-CP

Compensating

Rigid jaws

Compensating pull-down chucks Ø 135 - 650 mm

Active pull-down
Tongue & groove
3 jaws

TSF-CP

Compensating

Floating jaws

Compensating pull-down chucks Ø 170 - 315 mm

Active pull-down
Tongue & groove
2 jaws

TSBF-C

Self centering

Floating jaws

TSBR-C

Self centering

Rigid jaws

High precision pull-down chucks Ø 220 - 330 mm

Active pull-down
Tongue & groove
Large through hole
3 jaws

TSBF-CP

Compensating

Floating jaws

TSBR-CP

Compensating

Rigid jaws

Compensating pull-down chucks Ø 220 - 330 mm

Active pull-down
Tongue & groove
Large through hole
3 jaws
proofline® chucks = fully sealed–low maintenance

FRC-N

Compensating clamping

Tongue & groove

Lever chuck Ø 215 - 365 mm

Pull-down to axial datum
Spring loaded or fixed center
proofline® chucks = fully sealed–low maintenance

FRS

Self centering clamping

Tongue & groove

Lever chuck Ø 215 - 365 mm

Self centering clamping
Large through hole
proofline® chucks = fully sealed–low maintenance

TPT-C Ø 210 - 400 mm

2+2 independent jaw movement

Tongue & groove

High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 210 - 400 mm

Closed center
Tongue & groove

TPT-C Ø 500 - 800 mm

2+2 independent jaw movement

Tongue & groove

High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 500 - 800 mm

Closed center
Tongue & groove

TPT-RC

2+2 independent jaw movement

Tongue & groove

High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 1000 - 2000 mm

Closed center
Tongue & groove

TX-C

Self centering

Rigid jaws

High precision pull-down chucks Ø 170 - 530 mm

Active pull-down
Tongue & groove
3 jaws

TX-RV

Self centering

Rigid jaws

Quick jaw change, high precision pull-down chucks Ø 170 - 530 mm

Active pull-down
Quick jaw change (internal / external)
3 jaws

TSX-C 2+2

Pull down chuck

4 jaws 2+2

High precision pull-down chucks Ø 265 - 315 mm

Active pull-down
2+2 jaws
Tongue & groove

TEF-C

2+2+2 equalising

6 floating jaws

TER-C

2+2+2 equalising

6 rigid jaws

High precision pull-down 2+2+2 equalising Ø 260 - 850 mm

Active pull-down
Tongue & groove
6 jaws 2+2+2

SJL-C

Self centering

Tongue & groove

SJL-M

Self centering

Metric serration

High precision 6 jaw chucks (2+2+2) equalising Ø 225 - 400 mm

Jaws equalising as pair
Equalising mechanism lockable

SJL-C

6 jaws (2+2+2) equalising

Self centering

High precision power chucks Ø 225 - 800 mm

For thin walled or deformation sensitive components
Tongue & groove / metric serration
Centrifugal force compensation
Jaws equalising as a pair / mechanism lockable
proofline® chucks = fully sealed – low maintenance

SJLS-C

6 jaws (2+2+2) equalising -Self centering

Stationary

Catalog of all SMW-AUTOBLOK products dedicated to static work holding for machining centers, milling machine and special machines.

Zero Point Clamping System

5 Axis Machine Tools

Stationary Chuck

Twin Vises

Multiple Clamping System

Tombstones

Precision Machine Vices

Sinter Grip Clamping Insert

Manual chucks Stationary Catalog

Stationary Chucks Pneum Hydraulic

Automation

General catalog of all SMW-Autoblok products dedicated to the Automation

APS zero point system

Manual Rotary plate

AUTOMATIC ROTARY PLATE

AUTOMATIC+3 FEEDINGS ROTARY PLATE

AT-PM Automatic chuck change system

Universal 2-3 Grippers

2-3 Grippers

PRS Robot quick change systems

Mechatronic

Storage and loading station

APS zero point system

APS 100

Zero Point Clamping System Modules

Turbo Function to increase the pull-down force

APS 100 E BASIC and APS 100 E PREMIUM

2 Clamping slides

Suitable for automation
Anti-rotation key seat (for APS 100 E-PREMIUM)
Air sensing (for APS 100 E-PREMIUM)
Air cleaning (for APS 100 E-PREMIUM)
Modules fully sealed (proofline)
Maximum pull-in forces due to turbo function

APS 140

Zero Point Clamping System Modules

Turbo Function to increase the pull-down force

3 Clamping slides

Suitable for automation
Low installation height due to compact design
Modules fully sealed (proofline)
Maximum pull-in forces due to turbo function

APS 160

Zero Point Clamping System Modules

Turbo Function to increase the pull-down force

3 Clamping slides

Suitable for automation
Low installation height due to compact design
Modules fully sealed (proofline)
Maximum pull-in forces due to turbo function

APS 190

Zero Point Clamping System Modules

Turbo Function to increase the pull-down force

3 Clamping slides

Suitable for automation
Low installation height due to compact design
Modules fully sealed (proofline)
Maximum pull-in forces due to turbo function

APS 250

Zero Point Clamping System Modules

Turbo Function to increase the pull-down force

3 Clamping slides

Suitable for automation
Low installation height due to compact design
Modules fully sealed (proofline)
Maximum pull-in forces due to turbo function

Manual Rotary plate

MANUAL Rotary Plate Ø202

with 2 pneumatic connections for manual opening and TURBO

manual operation of the single APS

with APS 190 manual operation

Manual tooling fast set-up for Ø 210-250 and Ø 315 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø210 Ø250 and Ø315 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø260

with 2 pneumatic connections for manual opening and TURBO

manual operation of the single APS

with APS 250 manual operation

Manual tooling fast set-up for Ø 210-250 and Ø 315 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø210 Ø250 and Ø315 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø330

with 2 pneumatic connections for manual opening and TURBO

manual operation of the three APS

with 3 APS 140 manual operation

Manual tooling fast set-up for Ø 250-315 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø250 and Ø330 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø420

with 2 pneumatic connections for manual opening and TURBO

manual operation of the four APS

with 4 APS 140 manual operation

Manual tooling fast set-up for Ø 400 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø400 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø520

with 2 pneumatic connections for manual opening and TURBO

manual operation of the five APS

with APS 190 and 4 APS 160 manual operation

Manual tooling fast set-up for Ø 500 and Ø 650 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø500 and Ø650 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø650

with 2 pneumatic connections for manual opening and TURBO

manual operation of the five APS

with APS 190 and 4 APS 160 manual operation

Manual tooling fast set-up for Ø 650 and Ø 800 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø650 and Ø800 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø1000

with 2 pneumatic connections for manual opening and TURBO

manual operation of the seven APS

with APS 250 and 6 APS 160 manual operation

Manual tooling fast set-up for Ø 1000 and Ø 1250 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø1000 and Ø1250 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

MANUAL Rotary Plate Ø1400

with 2 pneumatic connections for manual opening and TURBO

manual operation of the nine APS

with APS 250 and 8 APS 160 manual operation

Manual tooling fast set-up for Ø 1400-1600 and Ø 1800 pallets and chucks

Pallet/Tooling fast set-up
Chucks fast set-up Ø1400, Ø1600 and Ø1800 on turning spindles, manual connection (with screw) between chuck and cylinder
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing manually operated

Rotary Plate accessories

Pneumatic rotating manifolds / Adaptors / Cover

Accessories available for Rotary Plates

Pneumatic manifolds: 4 PNEUMATIC Feedings ROTATING MANIFOLD to use with standard RU 2-22 rotating joint
Pneumatic manifolds: 3 PNEUMATIC Feedings ROTATING MANIFOLD for APS modules Automatic operation
Adaptors FLANGE ISO-A: direct, reduction and increasing assembly
Covers: magnet protection covers for 140 APS and 160 APS
Covers: magnet protection covers for 190 APS and 250 APS

AUTOMATIC ROTARY PLATE

AUTOMATIC Rotary Plate Ø202

with APS 190 automatic operation

Automatic or manual tooling fast set-up for Ø 170 and Ø 210 turning workholding

Pallet/Tooling fast set-up on turning spindles
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø260

with APS 250 automatic operation

Automatic or manual tooling fast set-up for Ø 210-250-315 turning workholding

Pallet/Tooling fast set-up on turning spindles
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø330

with 3 APS 140 automatic operation

Automatic or manual tooling fast set-up for Ø 330 turning workholding

Pallet/Tooling fast set-up on turning spindles
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø420

with 4 APS 140 automatic operation

Automatic or manual tooling fast set-up for Ø 400 turning workholding

Pallet/Tooling fast set-up on turning spindles
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø520

with APS 190 and 4 APS 160 automatic operation

Automatic or manual tooling fast set-up for Ø 400 turning workholding

Pallet/Tooling fast set-up on turning spindles
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø650

with APS 190 and 4 APS 160 automatic operation

Automatic or manual tooling fast set-up for Ø 650-800 turning workholding

Pallet/Tooling fast set-up on turning spindles
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

Rotary Plate accessories

Pneumatic rotating manifolds / Adaptors / Cover

Accessories available for Rotary Plates

Pneumatic manifolds: 4 PNEUMATIC Feedings ROTATING MANIFOLD to use with standard RU 2-22 rotating joint
Pneumatic manifolds: 3 PNEUMATIC Feedings ROTATING MANIFOLD for APS modules Automatic operation
Adaptors FLANGE ISO-A: direct, reduction and increasing assembly
Covers: magnet protection covers for 140 APS and 160 APS
Covers: magnet protection covers for 190 APS and 250 APS

AUTOMATIC+3 FEEDINGS ROTARY PLATE

AUTOMATIC Rotary Plate Ø202

with 3 pneumatic feedings on pallet

with APS 190 automatic operation

Automatic or manual tooling fast set-up for Ø 170 and Ø 210 turning workholding

Pallet/Tooling fast set-up on turning spindles
3 pneumatic feedings available on pallet
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø260

with 3 pneumatic feedings on pallet

with APS 250 automatic operation

Automatic or manual tooling fast set-up for Ø210-250 and Ø 315 turning workholding

Pallet/Tooling fast set-up on turning spindles
3 pneumatic feedings available on pallet
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø330

with 3 pneumatic feedings on pallet

with 3 APS 140 automatic operation

Automatic or manual tooling fast set-up for Ø330 turning workholding

Pallet/Tooling fast set-up on turning spindles
3 pneumatic feedings available on pallet
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø420

with 3 pneumatic feedings on pallet

with 4 APS 140 automatic operation

Automatic or manual tooling fast set-up for Ø330 turning workholding

Pallet/Tooling fast set-up on turning spindles
3 pneumatic feedings available on pallet
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø520

with 3 pneumatic feedings on pallet

with APS 190 and 4 APS 160 automatic operation

Automatic or manual tooling fast set-up for Ø500 turning workholding

Pallet/Tooling fast set-up on turning spindles
3 pneumatic feedings available on pallet
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

AUTOMATIC Rotary Plate Ø650

with 3 pneumatic feedings on pallet

with APS 190 and 4 APS 160 automatic operation

Automatic or manual tooling fast set-up for Ø500 turning workholding

Pallet/Tooling fast set-up on turning spindles
3 pneumatic feedings available on pallet
Positioning accuracy < 0,005 mm
Case hardened main components to assure better accuracy and long life
Pneumatic opening (OPEN) / Closing by spring + Turbo function
Opening/closing automatically operated

Rotary Plate accessories

Pneumatic rotating manifolds / Adaptors / Cover

Accessories available for Rotary Plates

Pneumatic manifolds: 4 PNEUMATIC Feedings ROTATING MANIFOLD to use with standard RU 2-22 rotating joint
Pneumatic manifolds: 3 PNEUMATIC Feedings ROTATING MANIFOLD for APS modules Automatic operation
Adaptors FLANGE ISO-A: direct, reduction and increasing assembly
Covers: magnet protection covers for 140 APS and 160 APS
Covers: magnet protection covers for 190 APS and 250 APS

AT-PM Automatic chuck change system

AT-PM 200/170

AUTOMATIC CHUCK CHANGE SYSTEM

AT-PM Automatic chuck change system 200/170

Quick chucks change on lathe
Quick chucks change Ø170 Ø210 Ø250 available diameter on lathe, quick connection to double cylinder between automatic feeding
Pallet positioning accuracy pallet < 0,005 mm
Hardened materials for high accuracy and durability
AT-PM operation with hydraulic double cylinder
Air sensing function for pallet positioning

AT-PM 240/220

AUTOMATIC CHUCK CHANGE SYSTEM

AT-PM Automatic chuck change system 200/170

Quick chucks change on lathe
Quick chucks change Ø210 Ø250 Ø315 available diameter on lathe, quick connection to double cylinder between automatic feeding
Pallet positioning accuracy pallet < 0,005 mm
Hardened materials for high accuracy and durability
AT-PM operation with hydraulic double cylinder
Air sensing function for pallet positioning

AT-PM 320/300

AUTOMATIC CHUCK CHANGE SYSTEM

AT-PM Automatic chuck change system 320/300

Quick chucks change on lathe
Quick chucks change Ø315 Ø400 Ø530 available diameter on lathe, quick connection to double cylinder between automatic feeding
Pallet positioning accuracy pallet < 0,005 mm
Hardened materials for high accuracy and durability
AT-PM operation with hydraulic double cylinder
Air sensing function for pallet positioning

AT-PM DOUBLE PISTON CYLINDERS

WITH 4 SAFETY VALVES FOR AT-PM CONTROL

Double piston cylinder with 4 way oil manifold for separate actuation of the 2 cylinders

AT-PM actuation +TS and AP chucks
AT-PM actuation + collets
Pallet positioning accuracy pallet < 0,005 mm
Pressure range 8 - 70 bar
Horizontal or vertical installation
Safety valves on the biggest cylinders and stroke control on each cylinder

Universal 2-3 Grippers

2PXS-N 2PXS-NSI 2PXS-NSE

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2PXS-N 64 / 2PXS-NSI 64 / 2PXS-NSE 64

2 jaws self-centering grippers pneumatics protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP40
Highest rigidity and Repeatability: 0,01 mm
Prepared for Air purge

2PXS-L 2PXS-LSI 2PXS-LSE

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2PXS-L 64 / 2PXS-LSI 64 / 2PXS-LSE 64

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP40
Highest rigidity and Repeatability: 0,01 mm
Prepared for Air purge

2PXS-N 80 / 2PXS-NSI 80 / 2PXS-NSE 80

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2 jaws self-centering grippers pneumatics protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP40
Highest rigidity and Repeatability: 0,01 mm
Prepared for Air purge

2PXS-L 80 / 2PXS-LSI 80 / 2PXS-LSE 80

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP40
Highest rigidity and Repeatability: 0,01 mm
Prepared for Air purge

2PXS-N 100 / 2PXS-NSI 100 / 2PXS-NSE 100

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2 jaws self-centering grippers pneumatics protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP40
Highest rigidity and Repeatability: 0,01 mm
Prepared for Air purge

2PXS-L 100 / 2PXS-LSI 100 / 2PXS-LSE 100

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP40
Highest rigidity and Repeatability: 0,01 mm
Prepared for Air purge

2PXM-N 2PXM-NSI 2PXM-NSE

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2PXM-N 125 / 2PXM-NSI 125 / 2PXM-NSE 125

2 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,02 mm
Prepared for Air purge

2PXM-L 2PXM-LSI 2PXM-LSE

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2PXM-L 125 / 2PXM-LSI 125 / 2PXM-LSE 125

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,02 mm
Prepared for Air purge

2PXM-N 160 / 2PXM-NSI 160 / 2PXM-NSE 160

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,02 mm
Prepared for Air purge

2PXM-L 160 / 2PXM-LSI 160 / 2PXM-LSE 160

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,02 mm
Prepared for Air purge

2PXM-N 200 / 2PXM-NSI 200 / 2PXM-NSE 200

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,02 mm
Prepared for Air purge

2PXM-L 200 / 2PXM-LSI 200 / 2PXM-LSE 200

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,02 mm
Prepared for Air purge

2PXL-N 2PXL-NSI 2PXL-NSE

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

2PXL-N 250 / 2PXL-NSI 250 / 2PXL-NSE 250

2 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,04 mm
Prepared for Air purge

2PXL-L 2PXL-LSI 2PXL-LSE

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

2PXL-L 250 / 2PXL-LSI 250 / 2PXL-LSE 250

2 jaws self-centering grippers pneumatic and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings
Protection class IP64
Highest rigidity and Repeatability: 0,04 mm
Prepared for Air purge

3PXS-N 64 / 3PXS-NSI 64 / 3PXS-NSE 64

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP40
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm

3PXS-L 64 / 3PXS-LSI 64 / 3PXS-LSE 64

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP40
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm

3PXS-N 80 / 3PXS-NSI 80/ 3PXS-NSE 80

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP40
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm

3PXS-L 80 / 3PXS-LSI 80/ 3PXS-LSE 80

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP40
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm

3PXS-N 100 / 3PXS-NSI 100/ 3PXS-NSE 100

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP40
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm

3PXS-L 100/ 3PXS-LSI 100/ 3PXS-LSE 100

L=long stroke /SI=with springs ID /SE=with springs OD

Universal grippers long stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP40
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm

3PXM-N 125 / 3PXM-NSI 125 / 2PXM-NSE 125

N=normal stroke /SI=with springs ID /SE=with springs OD

Universal grippers normal stroke

3 jaws self-centering grippers pneumatics and protected

Aluminium body to contain the gripper weight
Functional parts heat-treated for high precision and long life
Master jaws with calibrated bushings and Protection class IP64
OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
Prepared for Air purge and Highest rigidity and Repeatability: 0,02 mm

Turning

Manual Chucks