Improved accuracy

• 

  Looking for a solution for detecting 10μm of Power steering parts… 2013.10.11

• 

  Air sensor is low accuracy that confirming adhesion of Precision Component for PC cannot be done properly…2013.09.04

• 

  Radiation degrades photomicrosensors fast and we have to replace them every two or three months.2012.09.10

• 

  False detection of photoelectric sensors results in damage to HDD disks. We are experiencing problems because of the production of defective disks.2012.09.10

• 

  Radiation degrades optical fiber sensors. Are there any sensors durable under radiation exposure?2012.09.10

• 

  The switch is not broken but false signals frequently occurs. It is necessary to detect the opening and closing of disk brake pads without fail!2012.09.10

• 

  The signal point of proximity sensors varies with changes of the external environment.2012.09.10

• 

  Can the double feeding of paper as thin as 0.1 mm really be prevented by microswitches?2012.09.10

• 

  We have some problems with the presence detection of wafers for semiconductor devices with photoelectric sensors.2012.09.10

• 

  We need to correct the deviation of printing plates in micron increments.2012.09.10

• 

  We are experiencing difficulties because proximity sensors cannot achieve high precision for bobbin positioning in automatic knitting machines. 2012.09.10

• 

  Can 1 mm or smaller slight movements of diaphragms be detected stably with switches?2012.09.10

• 

  Optical fiber sensors detect objects falsely on conveyors.2012.09.10

• 

  Is the zero seek of carriers possible inside vacuum film forming equipment for FPDs?2012.09.10

• 

  Mutual interference of neighboring proximity sensors prevents stable detection.2012.09.10

• 

  False detection occurs because of condensation on the lens. We have difficulties because image sensors are easily affected by welding fumes.2012.09.10

• 

  Are optical fiber sensors the best for glass substrate alignment inside vacuum film forming equipment for FPDs?2012.09.10

• 

  Ultrasonic sensors cannot reliably detect 0.1 mm-thick sheets if the material type varies.2012.09.10

• 

  The Z-axis of a desktop robot needs correction.2012.09.10

• 

  Water drops on the liquid crystal glass cause false detection by optical fiber sensors.2012.09.10

• 

  I have some problems with the precision of air sensors for seating confirmation.2012.09.10

• 

  Can the slight movements of valve gates be detected at high temperatures during mold

• Vacuum environment

  • 

    We have some problems with the presence detection of wafers for semiconductor devices with photoelectric sensors.2012.09.10

  • 

    We are experiencing problems with connectors for optical fiber sensors inside vacuum film forming equipment.2012.09.10

  • 

    Is the zero seek of carriers possible inside vacuum film forming equipment for FPDs?2012.09.10

  • 

    In workpiece seating confirmation, optical fiber sensors cannot reach trays inside vacuum film forming equipment.2012.09.10

  • 

    Are optical fiber sensors the best for glass substrate alignment inside vacuum film forming equipment for FPDs?2012.09.10

  • Hostile environments

    • 

      Air sensor is low accuracy that confirming adhesion of Precision Component for PC cannot be done properly…2013.09.04

    • 

      Contact displacement sensors used for measurement inside CNC cylindrical grinding machines cannot survive the harsh internal environment.2012.09.10

    • 

      The signal point of proximity sensors varies with changes of the external environment.2012.09.10

    • 

      Can small-diameter drills (ø 5 mm) length detection be made more reliable? Laser sensors are prone to fail in adverse environments.2012.09.10

    • 

      False detection occurs because of condensation on the lens. We have difficulties because image sensors are easily affected by welding fumes.2012.09.10

    • 

      Water drops on the liquid crystal glass cause false detection by optical fiber sensors.2012.09.10

    • Space saving

      • 

        Radiation degrades photomicrosensors fast and we have to replace them every two or three months.2012.09.10

      • 

        Radiation degrades optical fiber sensors. Are there any sensors durable under radiation exposure?2012.09.10

      • 

        The switch is not broken but false signals frequently occurs. It is necessary to detect the opening and closing of disk brake pads without fail!2012.09.10

      • 

        Is there any alternative to contact detection by installing an intermediate unit onto proximity sensors?2012.09.10

      • 

        We have some problems with the presence detection of wafers for semiconductor devices with photoelectric sensors.2012.09.10

      • 

        We need to correct the deviation of printing plates in micron increments.2012.09.10

      • 

        Can 1 mm or smaller slight movements of diaphragms be detected stably with switches?2012.09.10

      • 

        There is no mounting space for a photoelectric sensor in workpiece detection with a robot.2012.09.10

      • 

        We are experiencing problems with connectors for optical fiber sensors inside vacuum film forming equipment.2012.09.10

      • 

        Mutual interference of neighboring proximity sensors prevents stable detection.2012.09.10

      • 

        The intermediate mechanism installed for the detection of screws in pinholes with a proximity sensor costs too much.2012.09.10

      • 

        Are optical fiber sensors the best for glass substrate alignment inside vacuum film forming equipment for FPDs?2012.09.10

      • Durability improvement

        • 

          Radiation degrades photomicrosensors fast and we have to replace them every two or three months.2012.09.10

        • 

          Radiation degrades optical fiber sensors. Are there any sensors durable under radiation exposure?2012.09.10

        • 

          The switch is not broken but false signals frequently occurs. It is necessary to detect the opening and closing of disk brake pads without fail!2012.09.10

        • 

          Can small-diameter drills (ø 5 mm) length detection be made more reliable? Laser sensors are prone to fail in adverse environments.2012.09.10

        • Slight movement detection

          • 

            The switch is not broken but false signals frequently occurs. It is necessary to detect the opening and closing of disk brake pads without fail!2012.09.10

          • 

            Can the double feeding of paper as thin as 0.1 mm really be prevented by microswitches?2012.09.10

          • 

            Can 1 mm or smaller slight movements of diaphragms be detected stably with switches?2012.09.10

          • 

            Ultrasonic sensors cannot reliably detect 0.1 mm-thick sheets if the material type varies.2012.09.10

          • 

            Can the slight movements of valve gates be detected at high temperatures during mold injection?2012.09.10

          • Radiation environment

            • 

              Radiation degrades photomicrosensors fast and we have to replace them every two or three months.2012.09.10

            • 

              Radiation degrades optical fiber sensors. Are there any sensors durable under radiation exposure?

            • Improved accuracy of XY talbes

              • 

                Is high-precision positioning for the driving part of equipment possible with stepper motors?2012.09.10

              • 

                We need to correct the deviation of the X-Y axes of the table of semiconductor inspection devices.2012.09.10

              • Cost reduction

                • 

                  Using expensive Touch Probes for Updating the wear of Grinding Stone?! Looking for more economical solution…2013.10.11

                • 

                  Contact displacement sensors used for measurement inside CNC cylindrical grinding machines cannot survive the harsh internal environment.2012.09.10

                • 

                  Radiation degrades photomicrosensors fast and we have to replace them every two or three months.2012.09.10

                • 

                  We are experiencing difficulties because the detection of double sheet metal feeding with expensive contact displacement sensors costs too much.2012.09.10

                • 

                  Radiation degrades optical fiber sensors. Are there any sensors durable under radiation exposure?2012.09.10

                • 

                  The switch is not broken but false signals frequently occurs. It is necessary to detect the opening and closing of disk brake pads without fail!2012.09.10

                • 

                  Is high-precision positioning for the driving part of equipment possible with stepper motors?2012.09.10

                • 

                  Can small-diameter drills (ø 5 mm) length detection be made more reliable? Laser sensors are prone to fail in adverse environments.2012.09.10

                • 

                  Is there any alternative to contact detection by installing an intermediate unit onto proximity sensors?2012.09.10

                • 

                  We have some problems with the presence detection of wafers for semiconductor devices with photoelectric sensors.2012.09.10

                • 

                  We need to correct the deviation of printing plates in micron increments.2012.09.10

                • 

                  Can 1 mm or smaller slight movements of diaphragms be detected stably with switches?2012.09.10

                • 

                  We are experiencing problems with connectors for optical fiber sensors inside vacuum film forming equipment.2012.09.10

                • 

                  Are expensive touch probes necessary in end face measurement for grinders?2012.09.10

                • 

                  The intermediate mechanism installed for the detection of screws in pinholes with a proximity sensor costs too much.2012.09.10

                • 

                  Expensive sensors for spring endurance testers? Are there any switches that can be used in automatic stop mechanisms?2012.09.10

                • 

                  Are optical fiber sensors the best for glass substrate alignment inside vacuum film forming equipment for FPDs?2012.09.10

                • 

                  Ultrasonic sensors cannot reliably detect 0.1 mm-thick sheets if the material type varies.2012.09.10