Metric Work Supports Standard Features
- Highly repeatable, repeats position ±0.005 mm
- Built in polyurethane wipers keep chips and debris out and reduces the chance of plunger/sleeve sticking or binding
- May be bolted up or down to mount directly on fixture plates. May also be installed through a hole and locked in place using retaining collars for easy adjustment
|
|
Standard G 1/4 and G 1/8 porting is located in the base of the support for easy access to both the clamp and vent ports (bronze filter installed before shipping).
VektorFlo® Metric work supports last longer and stand up to harsh environments and abuse better than other models.
Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports.
Special corrosion resistant plungers and sleeves reduce the tendency to stick.
BHC™ coating on the work support bodies helps prevent corrosion.
Special large diameter plungers and sleeves provide greater rigidity. Metric Spring Advance Work Supports
Specifications
|
|
Model No. | Support Capacity (kN)* | Mounting Style | Contact Force (N) | Stroke (mm) | Base Dimensions (mm) | Extended Height (mm) | Oil Capacity (cm3) |
41-0050-07
|
4,4
|
Base
|
4,5 - 9
|
6,5
|
24 x 33,5 x 44,5
|
56
|
0,16
|
41-0051-07
|
Cartridge
|
N/A
|
47,5
|
0,16
|
41-0050-06
|
11
|
Base
|
9 - 26,5
|
9,5
|
25 x 41,5 x 59
|
70,5
|
0,33
|
41-0051-06
|
Cartridge
|
N/A
|
62
|
0,33
|
41-0050-04
|
33,4
|
Base
|
40 - 80
|
12,5
|
25 x 63,5 x 76
|
111
|
1,64
|
41-0050-05
|
55,6
|
Base
|
49 - 71
|
19
|
31,5 x 89 x 97
|
133
|
4,26
|
|
* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.
NOTE: Minimum fluid pressure is 52 bar (5,2 MPa)
NOTE: DIN ISO 2768 T1 and T2 not applicable
For minimum operating pressures and resulting capacities, see Capacity Charts.
etric Air Advance Work Supports
Specifications
|
Model No. | Support Capacity (kN)* | Mounting Style*** | Hydraulic Connection | Contact Force (N)** | Stroke (mm) | Base Dimensions (mm) | Retracted Height (mm) | Oil Capacity (cm3) |
41-0060-07
|
4,4
|
Base
|
G 1/8 Port |
17,5
|
6,5
|
24 x 33,5 x 44,5
|
49,5
|
0,16
|
41-0061-07
|
Cartridge
|
Thru Cavity |
N/A
|
41
|
41-0060-06
|
11
|
Base
|
G 1/8 Port |
35,5
|
9,5
|
25 x 41,5 x 59
|
61
|
0,33
|
41-0061-06
|
Cartridge
|
Thru Cavity |
N/A
|
52,5
|
41-0060-04
|
33,4
|
Base
|
G 1/8 Port |
89
|
12,5
|
25 x 63,5 x 76
|
98
|
1,64
|
41-0060-05
|
55,6
|
Base
|
G 1/8 Port |
253,5
|
19
|
31,5 x 89 x 97
|
114
|
4,26
|
|
* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.
** Contact force at 1,7 bar (.17 MPa) maximum. To lower the contact force, install an air filter regulator of appropriate size.
*** For cartridge mounted models, see the Cavity Dimensions tab
NOTE: Minimum fluid pressure is 36 bar (3,6 MPa)
DIN ISO 2768 T1 and T2 not applicable Metric Fluid Advance Work Supports
Specifications
7.3 kn Capacity Cartridge
|
|
Model No. | Support Capacity (kN)* | Hydraulic Connection | Contact Force (N)** | Stroke (mm) | Base Dimensions (mm) | Retracted Height (mm) | Oil Capacity (cm3) |
Fluid Advance Work Supports, hydraulic pushes a spring which lifts the plunger; hydraulic pressure locks in place. |
41-0070-04
41-0070-14
|
4.4 |
G 1/8 Port |
4.4 - 26.7 |
6,5
12.5
6.5
12.5
|
23 x 33.5 x 44.5
|
62.5
75
|
2.6
2.8
1.3
1.5
|
41-0071-04
41-0071-14
|
Cartridge |
N/A |
53.5
66.5
|
41-0171-12 |
7.3** |
Cartridge |
4.4-26.7 |
12.5 |
N/A |
67 |
1.5 |
41-0070-03
41-0071-13
|
11
|
G 1/8 Port |
13.5 - 44.5
|
6.5
12.5
6.5
12.5
|
31.5 x 41.5 x 58.5
|
82.5
95.5
|
3.1
3.4
2
2.3
|
41-0071-03
41-0071-13
|
Cartridge
|
N/A
|
72
84.5
|
41-0070-05
41-0071-05
|
17
|
G 1/8 Port |
26.5 - 53.5
|
12,5
|
25 x 73 x 81
N/A
|
82.5
72.5
|
10.7
9.7
|
|
* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.
* Interchangeable with many competitive products.
Note:
- Restrict the flow rate to a maximum of 2.13 l/min
- Minimum fluid pressure 52 bar (5.2 MPa)
- DIN ISO 2768 T1 and T2 not applicable
- The maximum system back-pressure a fluid advance work support can overcome is 0.7 bar(0.007 MPa). Return back-pressure greater the 0.7 bar (0.07MPa) may cause slow or failed retraction.
41-0051-00 41-0051-01 41-0050-04 41-0050-05 41-0050-07 41-0051-07 41-0050-06 41-0051-06
41-0061-00 41-0061-01 41-0060-04 41-0060-05 41-0060-07 41-0061-07 41-0060-06 41-0061-06
39-0020-09 40-9872-40 40-9872-43 40-9872-47 41-0071-03 41-0071-04 41-0070-03 41-0070-04 41-0071-05 41-0070-05 39-0510-59 41-0071-13 41-0070-13 41-0070-14 41-0071-14 41-0708-01 41-0707-01 41-0715-01 41-0171-12 |