Metric Special Use Clamps
Edge Clamps
- Low profile allows you to slab mill over the clamp on most parts.
- BHC™ (Black Hard Coating) on cylinder bodies.
Concentric Pull-Down Clamp
- Ideal for 5-sided Machining.
- Works well in robotic operations.
Eccentric Pull-Down Clamp
- Ideal for 5-sided Machining.
- Serve as support surface and "Z" locator.
Pull-Down Clamp
- Single Acting Spring Returned
- Single Acting Spring Returned, Manifold Mounted
- Double Acting
Pull-Down Clamp Jaws
- Hardened and Tempered (except smooth jaw)
- Three Styles - Serrated, Smooth and with Clamping Edge
|
|
Metric Edge Clamps
Specifications
|
|
Model No. | Type | Clamp Capacity (kN)* | Effective Horizontal Stroke (mm) | Body Size | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Vertical |
41-5310-01
|
Standard
|
8,9
|
2,2
|
5
|
41 x 73
|
73
|
2,9
|
1,4
|
41-5310-00
|
Manifold
|
8,9
|
2,2
|
5
|
41 x 63,5
|
63
|
2,9
|
1,4
|
|
All dimensions are in mm.
* Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine output force, use the following formula: Effective Piston area times Input Pressure = Angular Clamping Force. (Vertical Force= 0,2 x Angular Force) and (Horizontal Force =0,9 X Angular Force). Actual force may vary slightly due to friction loss, seal drag, and/or return springs.
Metric Pull-Down Clamp, Eccentric
Specifications
|
Model No. | Vertical Clamp Force (kN) | Permissable Horizontal Force (kN) | Radial Force of Sleeve Segments (kN) | Piston Diameter (mm) | Workpiece Hole Diameter | Lateral Compensation per clamp (mm) |
41-5721-07 41-5721-08 |
3,5 |
1 |
10 |
18 |
6,8 - 7,7 |
±0.25 |
7,8 - 8,7 |
41-5721-09 41-5721-10 |
5,3 |
1,5 |
15 |
22 |
8,8 - 9,7 |
9,8 - 10,7 |
41-5721-11 41-5721-12 |
8,5 |
2,5 |
25 |
28 |
10,8 - 11,7 |
11,8 - 12,7 |
41-5721-13 41-5721-14 |
11,5 |
3,5 |
35 |
32 |
12,8 - 13,7 |
13,8 - 14,7 |
|
All dimensions are in mm.
Maximum Operating Pressure 150 bar (15 MPa)
Minimum Operating Pressure 30 bar (3 MPa) Metric Pull-Down Clamp, Concentric
Specifications
|
|
Model No. | Vertical Clamp Force (kN) | Work Piece Hole Diameter (mm) | Work Piece Hole Depth Minimum (mm) | Lateral Compensation per clamp (mm) | Clamping Rim Height Minimum (mm) | Permissible Horizontal Force (kN) |
41-5711-09 41-5711-10 |
4 |
8,8-9,7 9,8-10,7 |
10 |
±0.25 |
6 |
1,2 |
41-5711-11 41-5711-12 41-5711-13 41-5711-14
|
10 |
10,8-11,9 12-12,9 13-13,9 14-14,9 |
15 |
8 |
3 |
41-5711-15 41-5711-16 41-5711-17 41-5711-18 41-5711-19
|
26 |
15-15,9 16-16,9 17-17,9 18-18,9 19-19,9 |
17 |
9 |
7,7 |
41-5711-20 41-5711-21 41-5711-22 41-5711-23 41-5711-24 41-5711-25 |
20-20,9 21-21,9 22-22,9 23-23,9 24-24,9 25-25,9 |
17 |
|
NOTE: For manifold mounting, remove the M5 screw and sealing washer and insert the o-ring (included). For proper sealing, mating surfaces should be flat within ,08, with maximum surface roughness of 1,6 µm Ra.
All dimensions are in mm.
Maximum operating pressure 350 bar (35 MPa)
Minimum operating pressure 30 bar (3 MPa)
Metric Single Acting Pull-Down Clamp, Spring Return, Manifold Mounted
Specifications
|
|
Model No. | Force at 400 bar (40 MPa) (kN) | Stroke D (mm) | Oil Volume (cm3) | Mounting Bolt 2 pieces | Torque Maximum (Nm) | Spring Force Minimum (N) | Weight (g) |
41-5311-05
|
4,5
|
5
|
0,57
|
M8 x 45
|
21
|
60
|
670
|
41-5311-20
|
20
|
8
|
4
|
M12 x 80
|
72
|
160
|
2500
|
41-5311-32
|
32
|
10
|
8
|
M16 x 100
|
180
|
210
|
4700
|
41-5311-50
|
50
|
12
|
15
|
M20 x 120
|
350
|
340
|
8800
|
|
Metric Double Acting Pull Down Clamp
Specifications
|
|
Model No. | Force (kN) | Stroke D (mm) | Volume (cm3) | Mounting Bolt 2 pieces | Torque Maximum (Nm) | Weight (g) |
Unclamp | Clamp | Unclamp |
41-5320-20
|
20
|
9,6
|
10
|
4,9
|
2,5
|
M8 x 60
|
25
|
2900
|
|
Metric Pull-Down Clamping Jaws
Specifications
41-5310-01 41-5310-00
41-5721-07 41-5721-08 41-5721-09 41-5721-10 41-5721-11 41-5721-12 41-5721-13 41-5721-14
41-5711-09 41-5711-10 41-5711-11 41-5711-12 41-5711-13 41-5711-14 41-5711-15 41-5711-16 41-5711-17 41-5711-18 41-5711-19 41-5711-20 41-5711-21 41-5711-22 41-5711-23 41-5711-24 41-5711-25
39-0510-43 39-0510-44 41-5311-05 41-5311-20 41-5311-32 41-5311-50
39-0510-44 41-5320-20
41-5320-20 41-5311-05 41-5311-20 41-5311-32 41-5311-50 41-5305-01 41-5320-01 41-5332-01 41-5350-01 41-5305-03 41-5320-03 41-5332-03 41-5350-03 41-5305-02 41-5320-02 41-5332-02 41-5350-02 |