Metric Cylinder Standard Features
- Adjustable force ranging from "minimal" to maximum cylinder capacity, by adjusting the input pressure
- Designed for long life in high production applications. Don't gamble with "cheap" cylinders which wear out prematurely
|
|
BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching. After years of use, cylinder removal is easier because BHC™'s corrosion resistance is better than black oxide or chrome plating.
Proprietary seal designs reduce leakage and increase seal life for longer lasting, more dependable cylinders.
Threaded models use positionable, G Series fluid ports.
Cartridge models are supplied with an appropriate gasket to seal against the cavity bottom.
Chromed and hardened alloy steel pistons won't "mushroom" even when used without grippers.
Special wipers keep chips and contaminants out.
Positive piston stop shoulder keeps the spring from "bottoming out" guarding against premature spring failure which can plague other cylinder brands.
NOTE: For maximum spring life, single acting cylinders should not be run to the end of stroke regularly.
Metric Threaded Mini-Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Thread | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Extend | Extend |
42-0010-01
|
4,4 |
9,5
|
M20 x 1,5 |
51
|
1,3 |
1,2
|
42-0010-10
|
19 |
66,5 |
2,5 |
42-0010-11
|
32 |
83 |
4,1 |
42-0010-02
|
10,1 |
6,5 |
M28 x 1,5 |
56
|
2,9 |
1,8 |
42-0010-12
|
19 |
69 |
5,5 |
42-0010-13
|
32 |
86 |
9,2 |
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.
All dimensions are in mm.
Metric Threaded Cylinders
Specifations
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Thread | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Retract | Extend | Retract | Extend | Retract |
42-0010-03
|
17,8 |
N/A |
12,5
|
M35 x 1,5 |
68
|
5,1 |
N/A |
6,5
|
N/A |
42-0010-04
|
25,5
|
80,5
|
13,0
|
42-0010-05
|
51
|
109
|
26,0
|
42-0010-06
|
39,9 |
N/A |
12,5
|
M48 x 1,5 |
70
|
11,4 |
N/A |
14,5
|
N/A |
42-0010-07
|
25,5
|
82,5
|
29,0
|
42-0020-00
|
17,8 |
5,9 |
25,5
|
M48 x 1,5 |
80,5
|
5,1 |
1,7 |
13,0
|
4,4 |
42-0020-01
|
51
|
109
|
26,0
|
8,8 |
42-0020-02
|
39,9 |
17,5 |
25,5
|
M65 x 1,5 |
82,5
|
11,4 |
5,0 |
29,0
|
12,7
|
42-0020-03
|
51 |
111,5 |
58,0
|
25,5 |
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.
All dimensions are in mm.
Metric Block Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Size (mm) | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Retract | Extend | Retract | Extend | Retract |
42-0110-00
|
10,1 |
N/A |
6,5
|
28,5 x 51 |
60
|
2,9 |
N/A |
1,9
|
N/A |
42-0110-01
|
19
|
79
|
5,7
|
42-0110-02
|
17,8 |
N/A |
12,5
|
44,5 x 51 |
71
|
5,1 |
N/A |
6,5
|
N/A |
42-0110-03
42-0110-12
|
25,5
38
|
84
100
|
13,0
19,3
|
42-0110-04
|
51
|
112,5
|
26,0
|
42-0110-05
|
39,9 |
N/A |
12,5
|
51 x 63,5 |
73
|
11,4 |
N/A |
14,5
|
N/A |
42-0110-06
42-0110-13
42-0110-14
|
25,5
38
51
|
86
98,5
114,5
|
29,0
43,4
58,0
|
42-0120-00
|
10,1 |
5,6 |
6,5
|
28,5 x 51 |
60
|
2,9 |
1,6 |
1,9
|
1,0
|
42-0120-01
|
19
|
79
|
5,7
|
3,0
|
42-0120-02
|
17,8 |
5,9 |
12,5
|
44,4 x 51 |
71
|
5,1 |
1,7 |
6,5
|
2,2
|
42-0120-03
42-0120-08
|
25,5
38
|
84
100
|
13,0
19,3
|
4,4
6,6
|
42-0120-04
|
51
|
112,5
|
26,0
|
8,8
|
42-0120-05
|
39,9 |
17,5 |
12,5
|
51 x 63,5 |
73
|
11,4 |
5,0 |
14,5
|
6,3
|
42-0120-06
42-0120-09
|
25,5
38
|
86
98,5
|
29,0
43,4
|
12,7
19,0
|
42-0120-07
|
51
|
114,5
|
58,0
|
25,4
|
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.
Metric Block Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Size (mm) | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Retract | Extend | Retract | Extend | Retract |
42-0110-00
|
10,1 |
N/A |
6,5
|
28,5 x 51 |
60
|
2,9 |
N/A |
1,9
|
N/A |
42-0110-01
|
19
|
79
|
5,7
|
42-0110-02
|
17,8 |
N/A |
12,5
|
44,5 x 51 |
71
|
5,1 |
N/A |
6,5
|
N/A |
42-0110-03
42-0110-12
|
25,5
38
|
84
100
|
13,0
19,3
|
42-0110-04
|
51
|
112,5
|
26,0
|
42-0110-05
|
39,9 |
N/A |
12,5
|
51 x 63,5 |
73
|
11,4 |
N/A |
14,5
|
N/A |
42-0110-06
42-0110-13
42-0110-14
|
25,5
38
51
|
86
98,5
114,5
|
29,0
43,4
58,0
|
42-0120-00
|
10,1 |
5,6 |
6,5
|
28,5 x 51 |
60
|
2,9 |
1,6 |
1,9
|
1,0
|
42-0120-01
|
19
|
79
|
5,7
|
3,0
|
42-0120-02
|
17,8 |
5,9 |
12,5
|
44,4 x 51 |
71
|
5,1 |
1,7 |
6,5
|
2,2
|
42-0120-03
42-0120-08
|
25,5
38
|
84
100
|
13,0
19,3
|
4,4
6,6
|
42-0120-04
|
51
|
112,5
|
26,0
|
8,8
|
42-0120-05
|
39,9 |
17,5 |
12,5
|
51 x 63,5 |
73
|
11,4 |
5,0 |
14,5
|
6,3
|
42-0120-06
42-0120-09
|
25,5
38
|
86
98,5
|
29,0
43,4
|
12,7
19,0
|
42-0120-07
|
51
|
114,5
|
58,0
|
25,4
|
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs.
Metric Combination Block Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Size (mm) | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Retract | Extend | Retract | Extend | Retract |
42-1121-00 |
10 |
5,5 |
16 |
35 x 60 |
68 |
2,9 |
1,6 |
4,6 |
2,5
|
42-1121-01 |
50 |
102 |
14,3 |
7,9
|
42-1121-02 |
17,7 |
10,8 |
20 |
45 x 65 |
71 |
5,1 |
3,1 |
10,1 |
6,2 |
42-1121-03 |
50 |
101 |
25,3 |
15,4 |
42-1121-04 |
27,7 |
17,7 |
25 |
55 x 75 |
85 |
7,9 |
5,1 |
19,8 |
12,7 |
42-1121-05 |
50 |
110 |
39,6 |
25,3 |
42-1121-06 |
46,8 |
29 |
25 |
63 x 85 |
89 |
13,4 |
8,3 |
33,5 |
20,8 |
42-1121-07 |
50 |
114 |
66,9 |
41,6
|
42-1121-08 |
70,9 |
43,2 |
25 |
75 x 100 |
100 |
20,3 |
12,4 |
50,7
|
30,9 |
42-1121-09 |
50 |
125 |
101,3 |
61,8 |
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return springs. Metric Hollow Rod Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Size | Minimum Height (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
42-0210-00
|
20,6
|
6,5
|
41,5 x 55
|
51
|
5,9
|
3,8
|
42-0210-01
|
29,7
|
9,5
|
49,5 x 62
|
63
|
8,5
|
8,1
|
42-0210-02
|
53,2
|
12,5
|
64,5 x 76
|
75,5
|
15,2
|
19,3
|
42-0220-00
|
20,6
|
6,5
|
41,5 x 55
|
51
|
5,9
|
3,8
|
42-0220-01
|
29,7
|
9,5
|
49,5 x 62
|
63
|
8,5
|
8,1
|
42-0220-02
|
53,2
|
12,5
|
64,5 x 76
|
75,5
|
15,2
|
19,3
|
|
** Cylinder capacities are listed at 350 bar (35MPa) maximum operating pressure. The output force is can be adjusted by varying hydraulic system pressure. To calculate the approximate output force for an application, multiply the Piston Area by the system operating pressure. Actual force may vary slightly due to frictional losses, seal and wiper drag, and/or return spring forces. Metric Cartridge Mount Mini-Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Thread | Minimum Length (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
42-1010-00
|
2,4
|
5.2
|
M16 x 1,5
|
28
|
0,7
|
0,3
|
42-1010-01
|
4,4
|
7
|
M20 x 1,5
|
38
|
1,3
|
0,8
|
42-1010-02
|
10,1 |
9,5
|
M28 x 1,5 |
35
|
2,9 |
2,7
|
42-1010-03
|
19
|
62
|
5,5
|
42-1010-04
|
17,5
|
8
|
M35 x 1,5
|
37,5
|
5,1
|
4,0
|
|
** Cylinder capacities are listed at 350 bar (35MPa) maximum operating pressure. The output force is can be adjusted by varying hydraulic system pressure. To calculate the approximate output force for an application, multiply the Piston Area by the system operating pressure. Actual force may vary slightly due to frictional losses, seal and wiper drag, and/or return spring forces. Easy Mount Cartridge Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (in.) | Effective Piston Area (cm2) | Oil Capacity (cm3) |
Extend | Retract | Extend | Retract | Extend | Retract |
42-1621-32 |
27 |
14 |
15 |
7,9 |
4,1 |
11,9 |
6,1 |
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the piston area by the operating pressure. (Actual force my vary slightly due to friction loss, seal and wiper drag, and/or return springs.)
42-0010-02 42-0010-10 42-0010-11 42-0010-01 42-0010-12 42-0010-13
42-0010-03 42-0010-06 42-0010-04 42-0010-05 42-0010-07 42-0020-00 42-0020-01 42-0020-02 42-0020-03
42-0110-01 42-0110-02 42-0110-00 42-0110-03 42-0110-04 42-0110-05 42-0110-06 42-0120-00 42-0120-01 42-0120-02 42-0120-03 42-0120-04 42-0120-05 42-0120-06 42-0120-07 42-0110-12 42-0110-13 42-0110-14 42-0120-08 42-0120-09
42-1110-00 42-1110-01 42-1110-02 42-1110-03 42-1110-04 42-1110-05 42-1110-08 42-1110-06 42-1110-09 42-1110-07 42-1120-00 42-1120-01 42-1120-02 42-1120-03 42-1120-08 42-1120-04 42-1120-05 42-1120-06 42-1120-09 42-1120-07
42-1121-02 42-1121-03 42-1121-04 42-1121-05 42-1121-06 42-1121-07 42-1121-09 42-1121-00 42-1121-01 42-1121-08
42-0210-00 42-0210-01 42-0210-02 42-0220-00 42-0220-02 42-0220-01
42-1010-00 42-1010-01 42-1010-02 42-1010-03 42-1010-04
42-1621-32
|