Metric Push/Pull Cylinders
|
- Special wipers keep chips and contaminants out .
- Chromed and hardened alloy steel plungers run longer with less wear and drag than other brands.
- Vent port with bronze filter gives the cylinder a place to breathe" and helps keep chips from drawing past wipers . (Can be used for a breather line or used as a Double Acting Unclamp port.)
- BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching, especially in the event of high side or "kick" loads which promote excessive scoring in other brands.
- Proprietary seal designs reduce leakage and increase seal life for longer lasting, more dependable cylinders.
|
Metric Push/Pull Cylinders, Threaded Body
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Vertical Clamping Stroke (mm) | Body Thread | Effective Piston Area (cm2) | Oil Capacity (cm3)**** |
Retract | Extend | Retract | Extend | Retract |
42-5010-51
|
N/A
|
2,1
|
14,5
|
M28 x 1,5
|
N/A
|
0,63
|
N/A
|
0,92
|
42-5010-91
|
N/A
|
6,2
|
20
|
M38 x 1,5
|
N/A
|
1,90
|
N/A
|
3,82
|
42-5011-31
|
N/A
|
13,7
|
29,5
|
M48 x 1,5
|
N/A
|
4,04
|
N/A
|
11,9
|
42-5018-00
|
N/A
|
24,9
|
42
|
M65 x 1,5
|
N/A
|
7,60
|
N/A
|
32
|
42-5020-51
|
5,3
|
2,1
|
14,5
|
M28 x 1,5
|
1,61
|
0,63
|
2,3
|
0,92
|
42-5020-91
|
13,3
|
6,2
|
20
|
M38 x 1,5
|
3,88
|
1,90
|
7,8
|
3,82
|
42-5021-31
|
27,1
|
13,7
|
29,5
|
M48 x 1,5
|
7,92
|
4,04
|
23
|
11,9
|
42-5028-00
|
53,3
|
24,9
|
42
|
M65 x 1,5
|
15,52
|
7,60
|
65,4
|
32
|
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output forcecan be adjusted by varying the hydraulic system pressure. to calculate the approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to frictional loss, seal and wiper drag, and/or return spring forces. Metric Block Pull Cylinders
Specifications
|
|
Model No. | Cylinder Capacity (kN)** | Stroke (mm) | Body Size (mm) | Piston Area (cm2) | Oil Capacity (cm3) |
Retract | Retract |
42-5111-01
|
5,9 |
25,5
|
44,5 x 51 |
1,7 |
4,4
|
42-5111-02
|
51
|
8,8
|
42-5111-51
|
17,5 |
25,5
|
51 x 63,5 |
5,0 |
12,7
|
42-5111-52
|
51
|
25,4
|
|
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force can be adjusted by varying the hydraulic system pressure. To calculate the approximate output force for your application, multiply the piston area by the system operating pressure. Actual force may vary slightly due to friction loss, seal and wiper drag, and/or return spring forces. 6 mm Tube Fittings
|