O-RING
O-RING
Last Update : 09/08/2015 20:32:45
ตารางโอริ่งขนาดมาตรฐานอเมริกา AS568 A
ขนาดของโอริงที่มีนั้นมีอยู่หลายมาตรฐาน ซึ่งแล้วแต่ว่าผู้ที่ผลิตและจัดจำหน่ายจะอ้างอิงตามมาตรฐานใด เช่น มาตรฐาน AS568 A ของอเมริกา มาตรฐาน JIS2401 ของญี่ปุ่น มาตรฐาน DIN ของเยอรมัน มาตรฐาน BS1806 และ BS4518 ของอังกฤษ สำหรับในกรณีที่เราต้องเปลี่ยนโอริงที่ชำรุดเสียหายให้เราดูอย่างแรกก่อนเลยว่าเครื่องจักรเป็นเครื่องที่ทำมาจากประเทศไหน ซึ่งส่วนใหญ่ก็จะใช้ มาตรฐานจากประเทศที่สร้างและออกแบบเครื่องจักร เช่นเครื่องจักรที่มาจากประเทศอเมริกาก็จะใช้มาตรฐานโอริงของอเมริกา ดังตารางโอริ่งขนาดมาตรฐานอเมริกา AS568 A ของอเมริกา
Last Update : 10/07/2012 14:09:03
โอริง นวัตกรรมชิ้นเล็กอันน่าทึ่ง
ยางโอริงคือ อะไร? ยางโอริงมีลักษณะเป็นยางวงขนาดเล็ก ใช้เป็นอุปกรณ์สำหรับกันซึม กันรั่ว ในเครื่องใช้ไฟฟ้า อิเล็กทรอนิกส์ รถยนต์ สุขภัณฑ์ และอื่นๆ ยางโอริงเป็นผลงานการประดิษฐ์ของนายช่างชาวเดนมาร์ก ชื่อ นีล คริสเตนเซ่น (Niels Christensen) ซึ่งขณะที่เขานำผลงานนี้ไปจดสิทธิบัตรเมื่อปี ค.ศ. 1937 นั้น นีลมีอายุปาเข้าไปถึง 72 ปีแล้ว นี่เป็นเครื่องยืนยันได้อย่างดีว่า ความเป็นนักประดิษฐ์ไม่ได้ถูกจำกัดด้วยเรื่องของอายุ
Last Update : 07/07/2012 04:12:17
TEFLON (PTFE) HOSE PH370 CONVOLUTED / PH371 CONVOLUTED CONDUCTIVE
Brand : POLYHOSE
Model : PH370 - PTFE - CONVOLUTED HOSE
TEFLON (PTFE) HOSE PH370 CONVOLUTED / PH371 CONVOLUTED CONDUCTIVE Aplication: P.T.F.E. hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficient of friction and resists deterioration. Therefore the hose is used generally in applications where all or one of the above properties is the main criteria in automotive, chemical, pharmaceutical & food processing, plastic & rubber molding machines. Also, for some applications the tube can also be made conductive to dissipate electro-static Charges. Applicable Standard: Standard: Polyhose proprietary product. Construction: Core: Helically convoluted sintered tube of polytetrafluoroethylene (P.T.F.E.). Reinforcement: Single braid of 304/316 series of stainless steel wire Temperature Range: Continuous: -54?C to +260?C
Last Update : 09:50:04 19/11/2024
TEFLON (PTFE) HOSE PH179 - SAE J517 100R14 SMOOTH BORE PTFE HOSE
Brand : POLYHOSE
Model : PH179 TEFLON (PTFE) HOSE - SAE J517 100R14 SMOOTH BORE PTFE HOSE
TEFLON (PTFE) HOSE PH179 - SAE J517 100R14 SMOOTH BORE PTFE HOSE Application: P.T.F.E hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficent of friction and resists deterioration. Therefore the hose is used generally in applications where all are one of the above properties is the main criteria. Applicable Standard: Standard: SAE J517 ? 100R14 Construction: Core: Sintered tube of polytetrafluoroethylene (P.T.F.E.). Reinforcement: Single braid of 303/304 series of stainless steel wire Temperature Range: Continuous: -54?C to +260?C
Last Update : 09:42:56 19/11/2024
HYDRAULIC HOSE PH154 - SAE J517-100-R2 / EN 853 2SN HIGH PRESSURE HYDRAULIC LINES 80 TO 415 BAR
Brand : POLYHOSE
Model : HYDRAULIC HOSE PH154 - SAE J517-100-R2
HYDRAULIC HOSE PH154 - SAE J517-100-R2 / EN 853 2SN HIGH PRESSURE HYDRAULIC LINES 80 TO 415 BAR Application: High Pressure Hydraulic Lines 80 to 415 bar and requires compact outer dia. For use with petroleum, synthetic or water based fluids in Hydraulic systems Suitable for Agricultural, Earthmoving & Material handling equipments and machineries/systems. Applicable Standard: Standard: SAE J517 ? 100 R2 / EN 853-2SN Construction: Core: Oil & water resistant Synthetic rubber Reinforcement: Double steel wire braids Cover: Black Color, Synthetic rubber resistant to weather and abrasion ,oil & ozone Temperature Range: Continuous: -40?C to +120?C Impulse Cycles : 200,000 Tested upto: 400,000 cycles,upto 1? I.D.
Last Update : 07:41:09 14/11/2024
HYDRAULIC HOSE PH153 - SAE J517-100-R1 / EN 853 1SN MEDIUM PRESSURE HYDRAULIC LINES 40 TO 250 BAR
Brand : POLYHOSE
Model : HYDRAULIC HOSE PH153
HYDRAULIC HOSE PH153 - SAE J517-100-R1 / EN 853 1SN MEDIUM PRESSURE HYDRAULIC LINES 40 TO 250 BAR Application: MEDIUM Pressure Hydraulic Lines 40 to 250 bar and requires compact outer dia. For use with petroleum, synthetic or water based fluids in Hydraulic systems Suitable for Agricultural, Earthmoving & Material handling equipments and machineries/systems Applicable Standard: Standard: SAE J517 ? 100 R1 / EN 8531SN Construction: Core: Oil & water resistant Synthetic rubber Reinforcement: Single steel wire braid Cover: Black Color, Synthetic rubber resistant to weather and abrasion, oil & ozone. Temperature Range: Continuous: -40?C to +120?C Impulse Cycles : 150,000 Tested upto: 300,000 cycles, upto 1I.D.
Last Update : 07:38:39 14/11/2024
HYDRAULIC HOSE PH146 - SAE J517-100-R5 MEDIUM PRESSURE HYDRAULIC LINES 25 TO 210 BAR
Brand : POLYHOSE
Model : HYDRAULIC HOSE PH146 - SAE J517-100-R5
HYDRAULIC HOSE PH146 - SAE J517-100-R5 MEDIUM PRESSURE HYDRAULIC LINES 25 TO 210 BAR Application: MEDIUM Pressure Hydraulic Lines 25 to 210 bar. For use with fluids in Hydraulic systems Can also be used in air and water. Suitable for Agricultural, Earthmoving & Material handling equipments and machineries/systems Applicable Standard: Standard: SAE J517 ? 100 R5 Construction: Core: Oil and Water resistant Synthetic rubber Reinforcement: Single steel wire braid Cover: Black Color, single braid of textile fiber Temperature Range: Continuous: -40?C to +120?C
Last Update : 07:36:11 14/11/2024
HYDRAULIC HOSE PH144 - SAE J517-100-R3 / EN 854 /LOW PRESSURE AND LOW IMPULSE HYDRAULIC LINES 30 TO 110 BAR
Brand : POLYHOSE
Model : PH144 - SAE J517 - 100 R3
PH144 - SAE J517 - 100 R3 / EN 854: Standard Hydraulic Hose ? Rubber HYDRAULIC HOSE PH144 - SAE J517-100-R3 / EN 854 /LOW PRESSURE AND LOW IMPULSE HYDRAULIC LINES 30 TO 110 BAR Application: Low pressure and low impulse hydraulic lines 30 to 110 bar.for use with petroleum, synthetic or water based fluids in Hydraulic systems. Suitable for Agricultural, Construction & Material handiling equipments and machineries/systems. Applicable Standard: Standard: SAE J517 ? 100 R3 / EN 854 Construction: Core: Oil resistant Synthetic rubber Reinforcement: Double fiber braids Cover:Black Color, Synthetic rubber resistant weather and abrasion Temperature Range:Continuous: -40?C to +120?C PH144 - SAE J517 - 100 R3 / EN 854: สายไฮดรอลิกมาตรฐาน ? ยาง สายไฮดรอลิก PH144 - SAE J517-100-R3 / EN 854 / สายไฮดรอลิกแรงดันต่ำและแรงกระตุ้นต่ำ 30 ถึง 110 บาร์ การใช้งาน: สายไฮดรอลิกแรงดันต่ำและแรงกระตุ้นต่ำ 30 ถึง 110 บาร์ สำหรับใช้กับน้ำมันปิโตรเลียม สังเคราะห์ หรือของเหลวที่ใช้กับน้ำในระบบไฮดรอลิก เหมาะสำหรับอุปกรณ์และเครื่องจักร/ระบบการจัดการวัสดุทางการเกษตร การก่อสร้าง และการจัดการวัสดุ มาตรฐานที่ใช้บังคับ: มาตรฐาน: SAE J517 - 100 R3 / EN 854 โครงสร้าง: แกนกลาง : ยางสังเคราะห์ทนน้ำมัน การเสริมแรง: เส้นใยคู่ถักเปีย ปลอก: สีดำ ยางสังเคราะห์ทนต่อสภาพอากาศและการขีดข่วน ช่วงอุณหภูมิ: ต่อเนื่อง: -40?C ถึง +120?C
Last Update : 07:34:59 14/11/2024
HYDRAULIC HOSE PH147 - SAE J517-100-R6 / EN 854 / VERY LOW PRESSURE AND LOW IMPULSE HYDRAULIC LINES 20 TO 35 BAR
Brand : POLYHOSE
Model : HYDRAULIC HOSE PH147
HYDRAULIC HOSE PH147 - SAE J517-100-R6 / EN 854 / VERY LOW PRESSURE AND LOW IMPULSE HYDRAULIC LINES 20 TO 35 BAR Application: Very low pressure and low impulse hydraulic lines 20 to 35 bar.for use with petroleum, synthetic or water based fluids in Hydraulic systems. Suitable for Agricultural, Stationary equipments and hydraulic systems. Applicable Standard: Standard: SAE J517 ? 100 R6 / EN 854 Construction: Core: Oil resistant Synthetic rubber Reinforcement: Single fiber braid Cover: Black Color, Synthetic rubber resistant to oil, weather and abrasion Temperature Range: Continuous: -40?C to +120?C
Last Update : 07:34:26 14/11/2024
HYDRAULIC HOSE PH278 - SPIRAL HOSE. EN 856 / 4SH /VERY HIGH PRESSURE HYDR.LINES 250 TO 420 BAR
Brand : POLYHOSE
Model : HYDRAULIC HOSE PH278
HYDRAULIC HOSE PH278 - SPIRAL HOSE. EN 856 / 4SH /VERY HIGH PRESSURE HYDR.LINES 250 TO 420 BAR Application: Very high pressure Hydraulic Lines 250 to 420 bar and hydrostatic transmission lines for use with petroleum, synthetic or water based fluids in Hydraulic systems. Suitable for Eathmoving & Material handling equipemtns and machineries/systems. Applicable Standard: Standard: EN 856-4SH Construction: Core: Oil and Water resistant Synthetic rubber Reinforcement: Four high tensile steel wire spirals Cover: Black Color, Synthetic rubber resistant to oil, weather and abrasion Temperature Range: Continuous: -40?C to +100?C Intermittent: max. 120?C
Last Update : 20:19:40 13/11/2024
RUBBER STEAM HOSE PH472 STEAM 2 W/B HOSE - EPDM RUBBER RESISTANT HIGH TEMPERATURE STEAM
Brand : POLYHOSE
Model : RUBBER STEAM HOSE PH472
RUBBER STEAM HOSE PH472 STEAM 2 W/B HOSE - EPDM RUBBER RESISTANT HIGH TEMPERATURE STEAM Application: High temparature steam lines at constant pressure of 250 psi. Applicable Standard: Standard: IS 10655 Type 3/BS 5342. Construction: Core: EPDM rubber resistant high temperature steam Reinforcement: Double steel wire braids Cover: Black color, EPDM rubber resistant to abrasion, heat and weather Temperature Range: Upto +205?C
Last Update : 20:12:47 13/11/2024
MULTIPURPOSE HOSE PH368 / POLYESTER TEXTILE YARM BRAIDING
Brand : POLYHOSE
Model : PH368-Multipurpose Hose
MULTIPURPOSE HOSE PH368 / POLYESTER TEXTILE YARM BRAIDING Application: Polyhose PropLow working Pressure for various kinds of application. The Hose can be used with Air,Gas,Water, and Petroleum, Synthetic or Water based fluids, Suitable for agricultural Automotives, and General industrial purposes Applicable Standard: Polyhose proprietary Product SAE Construction: Core: Black Plasticized PVC Reinforcement: Polyester textile yarm braiding. Cover: red Color, Abrasion Resistance thermoTemperature Range: Continuous: -40?C to +60?C
Last Update : 16:28:41 13/11/2024
HYDRAULIC HOSE PH277 - SPIRAL HOSE. EN 856 / 4SP VERY HIGH PRESSURE HYDRAULIC LINES 165 TO 450 BAR
Brand : POLYHOSE
Model : HYDRAULIC HOSE PH277
HYDRAULIC HOSE PH277 - SPIRAL HOSE. EN 856 / 4SP VERY HIGH PRESSURE HYDRAULIC LINES 165 TO 450 BAR Application: Very high pressure Hydraulic Lines 165 to 450 bar and hydrostatic transmission lines For use with petroleum, synthetic or water based fluids in Hydraulic systems Suitable for Earthmoving & Material handling equipments and machineries/systems Applicable Standard: Standard: EN 856-4SP Construction: Core: Oil and Water resistant Synthetic rubber Reinforcement: Four high tensile steel wire spirals Cover: Black Color, Synthetic rubber resistant to oil, weather and abrasion Temperature Range: Continuous: -40?C to +100?C Intermittent: max. 120?C
Last Update : 11:55:51 13/11/2024
O-RING KITS (AVAILABLE IN NITRILE-NBR 70 / 90 SHA AND VITON 75 SHA)
Brand : PARKER,TOPART
O-RING KITS (Available in Nitrile-NBR 70 / 90 ShA and Viton 75 ShA) O-Ring Kit 1 (AS568) :382 O-Rings in 30 different imperial sizes O-Ring Kit 2 (JIS) :391 O-Rings in 30 different JIS sizes O-Ring Kit 3 (AS568) :407 O-Rings in 32 different imperial sizes O-Ring Kit 4 (Metric) : 408 O-Rings in 32 different metric sizes O-Ring Kit 5 (AS568/3-9XX) : 212 O-Rings in 20 different imperial sizes
Last Update : 21:56:10 03/03/2017
NYLON PNEUMATIC TUBE
Brand : ASHUN
Nylon Tube ? Excellent in weather resistance ? Good aging ? Resists abrasion and vibration ? High tensile strength and modulus of elasticity ? High impact resistance, a high heat distortion?temperature ??Can withstand contact with chemicals, alkalis,?dilute?acids or oxidizing agents Application For Hydraulic Hoses, Robotics, and Vacuum, Fuel, Vapor, Air and Brake lines.?Its Heat Resistance and UV Stabilization Make it Resistant to?Stress-Cracking, So it Works Well in Sunny Areas.
Last Update : 18:16:19 08/11/2016
PU PNEUMATIC TUBE
Brand : ASHUN
PolyurethaneTube ? High?flexibility? ? Small bending radius ? Widely used in many applications? ??Available in ether and ester types ??Optimum abrasion resistance ??High tensile strength ??Low temperature flexibility Application Automated machinery, coating machinery, all kinds of pneumatic tools, pneumatic & hydraulic machinery, construction and various pneumatic tools. Polyether based polyurethane tube is hydrolysis-resistant, anti-bacterial & anti-fungous, and it can be used for gardening, cleaning, water hoses and other purposes.?Ether type polyurethane tube?is resistance to hydrolysis, fungus and weatherability. Ester type polyurethane tube give maximum abrasion resistance and good oil, solvent and great resistance.
Last Update : 17:30:51 08/11/2016
FLEXIBLE PVC SPIRAL STEEL WIRE REINFORCED HOSE OR FLEXIBLE PVC SUPER SUN SPRING HOSE
Brand : AUTOFLEX
FLEXIBLE PVC SPIRAL STEEL WIRE REINFORCED HOSE OR FLEXIBLE PVC SUPER SUN SPRING HOSE: SUPER SUN SPRING HOSE. With hard steel wires put inside, this hose withstands to decompression, which is appropriate for vacuuming applications.Superior in transparency, this hose is appropriate for piping of operating oil
Last Update : 17:29:49 08/11/2016
RUBBER FLEXIBLE JOINT SINGLE SPHERE-MAT.EPDM/NEOPRENE/NBR
Brand : POFPO
POFPO Rubber flexible joint are desi gned for tough demanding indusreial application,as found in : Air conditioning-heating and ventilating systems,chemical-petrochemical and industrial process piping systems. Power generating systems, marine service, pulp & paper systems,water-wastewater sewage and pollution control system. Instsalled next to mechanical equiment or between the anchor point of piping system. Specify the POFPO Rubber flexible joint to : 1.Absorb pipe/movement/stress 2. Decrease systems noise 3. Isolate Vibration 4. Compensate alignment/offset 5. Eliminate electrolysis 6. Protect against start up,Surge forces Features: -Vibration,Sound And Shock Absorption -Higher Burst Strength -Greater Recovery From Movement -Free From Corrosion -Security Assured In Usage -Low Deformation Under Pressure -Suitable For Suction And Delivery -Greater Movements are Availlable
Last Update : 11:18:15 23/09/2016
FLEXIBLE HOSE LARGE SIZE DIAMETER SUS304 LARGE DIAMETER STAINLESS STEEL METALIC CORRUGATED FLEXIBLE HOSE : DN100 (4?) ? DN600 (24?)
Brand : AUTOFLEX
TUBE AND BRAID AVAILABLE : SUS304/SUS316, BRAIDED MESH LAYER : SINGLE LAYER ท่ออ่อนสแตนเลส เกรด 304 ขนาดใหญ่ ใช้สำหรับงานประปา งานชลประทาน งานน้ำทั่วไป งานสตรีม DN100(4") - DN600 (24") (inch) stainless steel flexible hose with flange fitting : 1.Excellent Flexibility 2.Resistance to Corrosion 3.High Temperat 6"- 16" (Inch) Stainless Steel Flexible Hose With Flange Fitting: 1 High Physical Strength With Light Weight. 2 A Long UsaGe Life. 3 Good Corrosion Characteristics, Resistance to Fire,Moisture, Abrasion and Penetration. 4 Flexibility Making it Good For Static Installations or Even Where There is Constant Flexing in The Application 5 Absorbs Vibration and Noise From Pumps, Compressors, Engines Etc. 6 Compensates For Thermal Expansion and Contraction of Piping. 7 Corrects Problems of Misalignment. 8 A Flexible and Quick Alternative For Rigid Piping in Difficult Locations. - Iron & Steel Industry (อุตสาหกรรมเหล็กและเหล็กกล้า) - Petroleum and Gas Plants (ปิโตรเลียมและก๊าซ) - Chemistry industry (พืชอุตสาหกรรมเคมี) - Heating and cooling systems (ร้อนและระบบระบายความร้อน) - Food industry (อุตสาหกรรมอาหาร) - Automotive industry (อุตสาหกรรมยานยนต์) - Paper production plants (โรงงานผลิตกระดาษ) - Maritime industry (อุตสาหกรรมการเดินเรือ) - Defence industry (อุตสาหกรรมกลาโหม) - Moving systems (ระบบการย้าย) - Any kind of depot and tank connections (ชนิดของคลังและการเชื่อมต่อถัง)
Last Update : 20:11:45 22/09/2016
FLEXIBLE HOSE CORRUGATED ANNULAR SUS304, SUS321, SUS316 TYPE. FLANGE WITH END FIXED + FREE SIDE : DN15 (1/2?) ? DN.300 (12
Brand : AUTOFLEX
FLEXIBLE HOSE CORRUGATED ANNULAR SUS304, SUS321, SUS316 TYPE. FLANGE WITH END FIXED + FREE SIDE : DN15 (1/2?) ? DN.300 (12") Flexible Stainless Steel Hoses Seal Flexible stainless steel hose (sleeves) sealed, are designed for transportation of liquid and gaseous media, for water, steam, condensate, gas and petroleum products, chemical products. Operate in extreme conditions, operating pressures and temperatures. Spiral shaped convolution spiral advance profiled steel band with subsequent contact and seam welding. They have a diameter of 6 mm to 300 mm and lengths from 250 to 6000 mm. For the production of this type of hose used stainless strip thickness 0,15-0,40 mm. High-quality steel airtight hose is not advisable to use in systems with a high level of vibration as the exploitation of metal hoses in such conditions leads to a resonant vibration of the corrugations or shells entirely. Spiral represented by two species - rolled and corrugated variations. Corrugated metal oloruka made of seamless or longitudinally welded thin-walled tubes, which are formed by special mechanical or hydraulic devices and supplied with end fittings. They are used as low-cost flexible connecting elements as loading hoses and of movement, thermal expansion, vibration absorption. Corrugated metal hose is completely waterproof, can be used to transfer liquids and gases under high pressure. In addition, the hose to the valve can be used in vacuum systems. Addition weld metal hoses we supply hoses with flange with thread. Due to the high reliability and durability to impacts flexible connection was in demand in the market pipelines and has been widely used in the automotive, aerospace, shipbuilding, metallurgy, petroleum, chemical, food, medical industry and many other industries.
Last Update : 20:09:49 22/09/2016

Page View  20330  
Product Information :

Product Name:  
REDUCING HEX NIPPLE - 150 LBS STAINLESS STEEL SUS304 - SUS316 - CARBON STEEL SS400 : BSP,NPT


Product Category:   เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Product Sub-Category:   Fitting:Hexagon Nipple,Union,Reducing Nipple,Lap Joint for Flanges
Brand:   AUTOFLEX 
Product Type :   สินค้า, ผลิตภัณฑ์ 
Short Description :   REDUCING HEX NIPPLE - 150 LBS STAINLESS STEEL SUS304 - SUS316 - CARBON STEEL SS400 : BSP,NPT 304 Stainless Steel has high corrosion resistance Max Pressure: 150 Psi, Threaded with Hex Working Temperature: -196?C to +220?C (321?F to 428?F) NPT Threads (American Standard for Pipes) Nipples are used to attach two female ended pipes
     
 

REDUCING HEX NIPPLE - 150 LBS STAINLESS STEEL SUS304 - SUS316 - CARBON STEEL  SS400 :  BSP,NPT

150lbs. Pipe Fittings:
Material: 304 / 316 / 304L / 316L
Casting Process : Investment Casting
End Type: Thread / Socket Weld / Butt Weld
Thread: NPT / BSPT / BSP / Din2999 / ISO 7/1 ISO 228
Weld: DIN 3239 / ASME B16.25
Tolerance: +0.5mm(1/8"~2")+0.8mm(2-1/2"~4")
1/8"~2" Hexagon , 2-1/2"~4" Octagon

Product Features
304 Stainless Steel has high corrosion resistance
Max Pressure: 150 Psi, Threaded with Hex
Working Temperature: -196°C to +220°C (321°F to 428°F)
NPT Threads (American Standard for Pipes)
Nipples are used to attach two female ended pipes

Standard Pattern              
SIZE A B L W
mm in mm in mm in mm in
1/4" 1/8" 13  0.51  6 0.24 31  1.22  15.1 0.59
3/8" 1/8" 14  0.55  7 0.28 34  1.34  18.6 0.73
1/4" 14  0.55  7 0.28 34  1.34  18.6 0.73
1/2" 1/8" 16.5  0.65  0.31  36.5  1.44  23 0.91
1/4" 16.5  0.65  0.31  36.5  1.44  23 0.91
3/8" 16.5  0.65  0.31  36.5  1.44  23 0.91
3/4" 1/8" 16  0.63  0.31  40  1.57  29  1.14 
1/4" 16  0.63  0.31  40  1.57  29  1.14 
3/8" 17  0.67  0.31  41  1.61  28.5  1.12 
1/2" 17  0.67  0.31  41.5  1.63  28.5  1.12 
1" 1/4" 20  0.79  9 0.35 41  1.61  35.4  1.39 
3/8" 20  0.79  9 0.35 42.5  1.67  35.4  1.39 
1/2" 20  0.79  9 0.35 45  1.77  35.4  1.39 
3/4" 20  0.79  9 0.35 45  1.77  35.4  1.39 
1-1/4" 1/4" 21  0.83  10 0.39 42  1.65  44.5  1.75
3/8" 21  0.83  10 0.39 47  1.85  44.5  1.75 
1/2" 21  0.83  10 0.39 49  1.93  44.5  1.75 
3/4" 21  0.83  10 0.39 49  1.93  44.5  1.75 
1" 22  0.87  10 0.39 52  2.05  44.5  1.75 
1-1/2" 1/4" 20  0.79  10.5 0.41 42.5  1.65  51  2.01 
3/8" 21  0.83  10  0.39  47  1.85  50  1.97 
1/2" 21  0.83  10  0.39  49  1.93  50  1.97 
3/4" 21  0.83  10  0.39  49  1.93  50  1.97 
1" 21.5  0.85 11  0.39  52.5  2.07  50  1.97 
1-1/4" 22  0.87  11  0.43  55  2.17  51  2.01 
2" 3/8" 23  0.91  11 0.43 52  2.05  61.5  2.42 
1/2" 23  0.91  11 0.43 52  2.05  61.5  2.42 
3/4" 23  0.91  11 0.43 41.5  1.63  61.5  2.42 
1" 23  0.91  11 0.43 53.5  2.11  61.5  2.42 
1-1/4" 23  0.91  11 0.43 56  2.2  61.5  2.42 
1-1/2" 23  0.91  11 0.43 55.5  2.19  61.5  2.42 
2-1/2" 3/4" 27.5  1.08  13 0.51 64  2.52  78  3.07 
1" 27.5  1.08  13 0.51 63.5  2.5  78  3.07 
1-1/4" 27.5  1.08  13 0.51 63.5  2.5  78  3.07 
1-1/2" 27.5  1.08  13 0.51 63.5  2.5  78  3.07 
2" 27.5  1.08  13 0.51 65.5  2.58  78  3.07 
3" 1-1/2" 28  1.1  15 0.59 68  2.68  92  3.62 
2" 28  1.1  15 0.59 68.5  2.7  93  3.66 
2-1/2" 28.5  1.12  15 0.59 71  2.8  92  3.62 
4" 2" 30  1.18  15 0.59 75  2.95  117  4.61 
2-1/2" 30  1.18  15 0.59 75  2.95  117  4.61 
3" 30  1.18  15 0.59 75  2.95  117  4.61 
Tolerance: +0.5mm(1/8"~2") +0.8mm(2-1/2"~4")      
Economic Pattern              
SIZE A B L W
mm in mm in mm in mm in
1/4" 1/8" 11 0.43 6 0.24 29 1.14 15 0.59
3/8" 1/8" 12 0.47 7 0.28 31 1.22 18 0.71
1/4" 12 0.47 7 0.28 32 1.26 18 0.71
1/2" 1/8" 14 0.55 7 0.28 34 1.34 23 0.91
1/4" 14 0.55 7 0.28 35 1.38 23 0.91
3/8" 14 0.55 7 0.28 36 1.42 23 0.91
3/4" 1/8" 14 0.55 7 0.28 34 1.34 29 1.14
1/4" 14 0.55 7 0.28 35 1.38 29 1.14
3/8" 14 0.55 7 0.28 36 1.42 29 1.14
1/2" 14 0.55 7 0.28 39 1.54 29 1.14
1" 1/4" 17.5 0.69 9 0.35 41 1.61 35 1.38
3/8" 17.5 0.69 9 0.35 42 1.65 35 1.38
1/2" 17.5 0.69 9 0.35 45 1.77 35 1.38
3/4" 17.5 0.69 9 0.35 45 1.77 35 1.38
1-1/4" 1/4" 18 0.71 10 0.39 42 1.65 45 1.77
3/8" 18 0.71 10 0.39 43 1.69 45 1.77
1/2" 18 0.71 10 0.39 46 1.81 45 1.77
3/4" 18 0.71 10 0.39 46 1.81 45 1.77
1" 18 0.71 10 0.39 50 1.97 45 1.77
1-1/2" 1/4" 18.5 0.73 10.5 0.41 42.5 1.67 50 1.97
3/8" 18.5 0.73 10.5 0.41 43.5 1.71 50 1.97
1/2" 18.5 0.73 10.5 0.41 46.5 1.83 50 1.97
3/4" 18.5 0.73 10.5 0.41 46.5 1.83 50 1.97
1" 18.5 0.73 10.5 0.41 50.5 1.99 50 1.97
1-1/4" 18.5 0.73 10.5 0.41 50.5 1.99 50 1.97
2" 3/8" 20 0.79 11 0.43 45 1.77 62 2.44
1/2" 20 0.79 11 0.43 48 1.89 62 2.44
3/4" 20 0.79 11 0.43 48 1.89 62 2.44
1" 20 0.79 11 0.43 52 2.05 62 2.44
1-1/4" 20 0.79 11 0.43 52 2.05 62 2.44
1-1/2" 20 0.79 11 0.43 52 2.05 62 2.44
2-1/2" 3/4" 22.5 0.89 13 0.51 52.5 2.07 78 3.07
1" 22.5 0.89 13 0.51 56.5 2.22 78 3.07
1-1/4" 22.5 0.89 13 0.51 56.5 2.22 78 3.07
1-1/2" 22.5 0.89 13 0.51 56.5 2.22 78 3.07
2" 22.5 0.89 13 0.51 57.5 2.26 78 3.07
3" 1-1/2" 25 0.98 15 0.59 61 2.4 91 3.58
2" 25 0.98 15 0.59 62 2.44 91 3.58
2-1/2" 25 0.98 15 0.59 64.5 2.54 91 3.58
4" 2" 27 1.06 15 0.59 64 2.52 117 4.61
2-1/2" 27 1.06 15 0.59 66.5 2.62 117 4.61
3" 27 1.06 15 0.59 69 2.72 117 4.61
Tolerance: +0.5mm(1/8"~2") +0.8mm(2-1/2"~4")      

 

 

Product Related
FLEXIBLE HOSE CORRUGATED ANNULAR SUS304, SUS321, SUS316 TYPE. FLANGE WITH END FIXED + FREE SIDE : DN15 (1/2?) ? DN.300 (12
Brand : AUTOFLEX
FLEXIBLE HOSE CORRUGATED ANNULAR SUS304, SUS321, SUS316 TYPE. FLANGE WITH END FIXED + FREE SIDE : DN
HEX NIPPLE FITTING - 150 LBS STAINLESS STEEL SUS304 - SUS316 - CARBON STEEL SS400 : BSP,NPT
Brand : AUTOFLEX
HEX NIPPLE FITTING - 150 LBS STAINLESS STEEL SUS304 - SUS316 - CARBON STEEL SS400 : BSP,NPT,CARBON
FLEXIBLE PVC SPIRAL STEEL WIRE REINFORCED HOSE OR FLEXIBLE PVC SUPER SUN SPRING HOSE
Brand : AUTOFLEX
FLEXIBLE PVC SPIRAL STEEL WIRE REINFORCED HOSE OR FLEXIBLE PVC SUPER SUN SPRING HOSE: SUPER SUN SPRI
Gasket and Back Up Ring Teflon For Seals
Brand : AUTOFLEX
Teflon PTFE Back - Up Rings have no Intended Sealing Function. Instead, as Their Name Indicates, The
Pneumatic Air Cylinder SC Series
Brand : SPDC
Air Cylinder กระบอกลม เพื่อใช้ในงาน ระบบลมอัด โดย มีให้เลือกตามความต้องการของลูกค้า กระบอกลมเป็นอุปก
Air Control Valve 300 Series Port:3/8
Brand : SPDC
Air Control Valve ระบบนิวแมติก หรือ ระบบลมอัด จะทำงานได้ด้วยชุดกำเนิดลมอัดหรือปั้มลม จ่ายลมให้กับอุป
HYDRAULIC HOSE FLEXOR 12 MSHA SAE 100 R12 - EN 856 R12 : WIRE SPIRAL - 898AA
Brand : ALFAGOMMA
HYDRAULIC HOSE FLEXOR 12 MSHA SAE 100 R12 - EN 856 R12 : WIRE SPIRAL - 898AA
APPLICATION: VE
HYDRAULIC HOSE FLEXOR 13 MSHA SAE 100R13 - EN 856 R13 : WIRE SPIRAL - 809AA
Brand : ALFAGOMMA
HYDRAULIC HOSESE / Alfagoma Flexor 13 - MSHA SAE 100 R13 - EN 856 R13
Application: very hig
HYDRAULIC HOSE FLEXOR 6 SAE 100R6 - EN 854 R6 : TEXTILE BRAID - 806AA
Brand : ALFAGOMMA
HYDRAULIC HOSE FLEXOR 6 SAE 100R6 - EN 854 R6 : TEXTILE BRAID - 806AA
FLEXOR 6 SAE 100 R6 -
© 2000-2008 CopyRight by Auto A Plus Co.,Ltd
Tel. +66 2363-7582, +66 2363-7693, +66 095 564-2444, +66 095 985-9144, Line : ID. 095 564 2444  Fax. +66 (0) 2363-7583  Website. www.auto-a-plus.com, www.autoplus.co.th, www.autoflex.nanasupplier.com, www.thaitechno.net, www.industry.in.th, www.js456online.com, www.thailanddirectory.in.th, www.pantipmarket.com/items/16740484
disclaimer | privacy | contact us 

  Sale Login Warehouse Login Driver Login