High resolution, simple measurement of tension/compression force, switch test, connector insertion/withdraw test, fracture test and push pull testing equipment
· Indication of Measuring Unit: Kgf, N, lbf, ozf
· A/D Transducer: 16-bit, 100 times/sec
· Indication of Measuring Value: 5 Digit LCD (indicating forward/reverse direction)
· Condition indicating LED: Indication of charge and compare output condition
· Compare Output: High, Low, Good
· Analog Output: DC +/-1V
· Communication Output: USB
· Range of using temperature: -10? to 40?, 80% RH and below (in locations without due condensation phenomenon)
· Weight: Approximately 600g
· Electric Source: Nickel hydrogen (NimH), Chargeable Adapter (DC 9V)
· Continuous Use Life: Approximately 40 hours
· Charging Time: Approximately 8 hours
· Option OP-01: USB cable, OP-02 :Analog out and open collector connector.
Specifications
Model | FGA-K2 | FGA-K5 | FGA-K20 | FGA-K50 | FGA-K100 | FGA-K500 | FGA-T1 |
Capacity |
2.000kg |
5.000kg |
20.00kg |
50.00kg |
100.00kg |
500.0kg |
1000.0kg |
Min load |
0.001kg |
0.001kg |
0.01kg |
0.01kg |
0.05kg |
0.1kg |
0.5kg |
Sensor conformation |
Sensor Inside |
Sensor Inside |
Value error |
±0.2% |
FGA USB Driver
CP2102 usb to uart bridge controller