The oil mist eliminator Nina is specially designed for higher airflow and works on all machine tools with a cabin volume up to 424 CF (12 m³).

The Nina effectively cleans the oil mist/oil smoke formed during the machining process  and provides clean air into the workshop, as well as recycling almost all of your oil/coolant from the mist.

The Nina is suitable for all applications involving processes using oil, coolants or other lubricants. Even with tough applications such as grinding and machining of cast iron you can expect 99.97% particle free air. Read more about how this is possible under the Technology section.

See examples of how others have installed their Nina oil mist eliminator under Installation Images further down on this page.

The oil mist eliminator Lova effectively cleans the oil mist/oil smoke formed during metal processing and provides clean air into the workshop. With the Lova you recycle and reuse almost all of your oil/coolant which was a mist.

The Lova is suitable for all applications involving processes using oil, coolants or other lubricants. Even with tough applications such as grinding and machining of cast iron we provide 99.97% particle-free air. Read more about how this is possible under the Technology section.

The Lova works on all machine tools with a cabin volume of up to 318 CF (9 m³ ) and can be installed directly on top of the machine tool, on the side, on a wall/column or on a pillar stand. See examples on how others have installed their Lova further down on this page

The MOS-type oil skimmer is developed for applications with many solid particles. It separates the tramp oil effectively and extends the lifetime of your cutting fluid.

The technique exploits the viscosity differential between oil and cutting fluid. The tramp oil has greater viscosity than the cutting fluid and will therefore cling to the rotating spiral. The oil is transported upwards and is continuously scraped off into a tank by a rotating metal plate that is attached to the top of the spiral.

This new way of separating tramp oil is highly effective, gives you minimal loss of cutting fluids and has low maintenance requirements, low operating costs and a compact design.

The MOS-type oil skimmer has a capacity of 0.026 gal/h (100 ml/h) depending on the amount of oil and its viscosity.

The SLS oil skimmer gives you high separation of tramp oil and extends the lifetime of your cutting fluids. 

The technique exploits the viscosity differential between oil and cutting fluid, with the more viscous oil clinging to a rotating threaded device, from where it is separated out.

With the screw action oil skimmer you can separate more than twice as much tramp oil per hour than with a traditional belt skimmer while scarcely removing any cutting fluid. Whereas the screw action oil skimmer separates out 1.7 liters of tramp oil, the result for the belt skimmer is just 0.65 liters over the same time.*

This new way of separating tramp oil is highly effective, gives you minimal loss of cutting fluids and has low maintenance requirements, low operating costs and a compact design.