|
|
|
Page View 3859 |
Product Information : |
|
Product Name: |
|
Stationary Air Chuck for Machining Center |
|
Product Category: |
|
เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
|
Product Sub-Category: |
|
AIR CHUCK
|
Brand: |
|
CHANDOX |
Product Type : |
|
สินค้า, ผลิตภัณฑ์
|
Short Description : |
|
CHANDOX Stationary Air Chuck for Machining Center |
|
|
|
|
- Front-lock design?easy installation & save a apace.
- Available on multi-plate for mass production.
- Rust-proof for pneumatic cylinder.
- Dusts-proof & water-proof design to maintain its accuracy and lead to longer service life.
- Twin-pistons to increase the clamping force for heavy-duty cutting.(for twin piston only)
With built-in type cylinder, it is ideal for machining application on working table.
- Rust-proof for Pneumatic Cylinder?Inside wall of cylinder being rustproof treated? cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
- Dusts-proof and Waterproof? Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
- Benefit of Built-in Cylinder?The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
N |
O |
P |
R |
S |
MO-04 |
157 |
115 |
- |
15 |
77.5 |
104 |
26 |
49.5 |
14 |
10 |
23 |
13 |
Ø9(PCD Ø135) |
PT1/8 |
M8×1.25P |
3-M8×1.25P (PCDØ90) |
64 |
47 |
MO-05 |
185 |
135 |
- |
15 |
95 |
128 |
33 |
62 |
14 |
10 |
25 |
13 |
Ø9(PCD Ø165) |
PT1/4 |
M8×1.25P |
3-M8×1.25P (PCDØ100) |
80 |
47 |
MO-06 |
224 |
169 |
25 |
16 |
118 |
158 |
40 |
73 |
20 |
12 |
31 |
18 |
Ø11(PCD Ø202) |
PT1/4 |
M10×1.5P |
3-M8×1.25P (PCDØ134) |
80 |
47 |
MO-08 |
265 |
210 |
30 |
20 |
138 |
180 |
42 |
95 |
25 |
14 |
35 |
18 |
Ø11(PCD Ø243) |
PT1/4 |
M10×1.5P |
3-M10×1.5P (PCDØ136) |
80 |
47 |
MO-10 |
315 |
254 |
52 |
23 |
150 |
196 |
46 |
110 |
30 |
16 |
40 |
18 |
Ø13(PCD Ø285) |
PT1/4 |
M12×1.75P |
3-M12×1.75P (PCDØ170) |
80 |
47 |
MO-12 |
375 |
304 |
80 |
23 |
165 |
219 |
54 |
129 |
30 |
21 |
50 |
18 |
Ø17(PCD Ø340) |
PT3/8 |
M16×2P |
3-M12×1.75P (PCDØ200) |
80 |
55 |
ML-08 |
265 |
210 |
30 |
20 |
138 |
180 |
42 |
95 |
25 |
14 |
35 |
18 |
Ø11(PCD Ø243) |
PT1/4 |
M10×1.5P |
3-M10×1.5P (PCDØ136) |
80 |
47 |
MOT-04 |
157 |
115 |
- |
15 |
77.5 |
104 |
26 |
49.5 |
14 |
10 |
23 |
13 |
Ø9(PCD Ø135) |
PT1/8 |
M8×1.25P |
2-M8×1.25P (PCDØ90) |
64 |
47 |
MOT-05 |
185 |
135 |
- |
15 |
95 |
128 |
33 |
62 |
14 |
10 |
25 |
13 |
Ø9(PCD Ø165) |
PT1/4 |
M8×1.25P |
2-M8×1.25P (PCDØ100) |
80 |
47 |
MOT-06 |
224 |
169 |
25 |
16 |
118 |
158 |
40 |
73 |
20 |
12 |
31 |
18 |
Ø11(PCD Ø202) |
PT1/4 |
M10×1.5P |
2-M8×1.25P (PCDØ134) |
80 |
47 |
MOT-08 |
265 |
210 |
30 |
20 |
138 |
180 |
42 |
95 |
25 |
14 |
35 |
18 |
Ø11(PCD Ø243) |
PT1/4 |
M10×1.5P |
2-M10×1.5P (PCDØ136) |
80 |
47 |
MOT-10 |
315 |
254 |
52 |
23 |
150 |
196 |
46 |
110 |
30 |
16 |
40 |
18 |
Ø13(PCD Ø285) |
PT1/4 |
M12×1.75P |
2-M12×1.75P (PCDØ170) |
80 |
47 |
MODEL / SPEC. |
Q |
Piston Area (cm2) |
Plunger Stroke (mm) |
Jaw Stroke (Diameter) mm |
Max. Gripping Force kgf (KN) |
Max. Hydr. Pressure kgf/cm2 (Mpa) |
Gripping Force At Air Pressure 7 kgf/cm2 (0.7Mpa) |
Weight (kg) |
Gripping Range |
MO-04 |
- |
57 |
9 |
3.8 |
2400 (23.5) |
15 (1.5) |
930 (9.1) |
7.05 |
Ø9~Ø115 |
MO-05 |
- |
74 |
10 |
5.4 |
3285 (32.2) |
20 (2.0) |
950 (9.3) |
11.2 |
Ø12~Ø135 |
MO-06 |
- |
97 |
12 |
5.5 |
5040 (49.4) |
20 (2.0) |
1450 (14.2) |
21.0 |
Ø15~Ø169 |
MO-08 |
3-M10×1.5P (PCDØ186) |
156 |
16 |
7.4 |
8100 (79.4) |
20 (2.0) |
2350 (23.0) |
36.8 |
Ø20~Ø210 |
MO-10 |
3-M12×1.75P (PCDØ230) |
235 |
19 |
8.8 |
12210 (119.7) |
20 (2.0) |
3550 (34.8) |
56.4 |
Ø33~Ø254 |
MO-12 |
3-M12×1.75P (PCDØ260) |
292 |
23 |
10.6 |
14500 (142.1) |
20 (2.0) |
4400 (43.1) |
88.5 |
Ø40~Ø304 |
ML-08 |
3-M10×1.5P (PCDØ186) |
156 |
16.5 |
12 |
5202 (51) |
20 (2.0) |
1500 (14.7) |
37.6 |
Ø20~Ø210 |
MOT-04 |
- |
57 |
9 |
3.8 |
1900 (18.6) |
12 (1.2) |
930 (9.1) |
6.9 |
Ø9~Ø115 |
MOT-05 |
- |
74 |
10 |
5.4 |
2620 (25.6) |
16 (1.6) |
950 (9.3) |
11.2 |
Ø12~Ø135 |
MOT-06 |
- |
97 |
12 |
5.5 |
4030 (39.5) |
16 (1.6) |
1450 (14.2) |
21.0 |
Ø15~Ø169 |
MOT-08 |
2-M10×1.5P (PCDØ186) |
156 |
16 |
7.4 |
6480 (63.5) |
16 (1.6) |
2350 (23.0) |
36.8 |
Ø20~Ø210 |
MOT-10 |
2-M12×1.75P (PCDØ230) |
235 |
19 |
8.8 |
9760 (95.6) |
16 (1.6) |
3550 (34.8) |
56.4 |
Ø33~Ø254 |
OPERATION EXAMPLE
Speed, Accurate, Automatic 4-jaws clamping and self-center
With built-in type cylinder,it is ideal for machining application on working table.
- Rust-proof for Pneumatic Cyclinder? Inside wall of cyclinder being rustproof treated ;cyclinder can work under wet or high moisture circumstances without rusty or serized trouble.
- Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chip and coolant water form entering into inside of chuck cyclinder to maintain its accuracy and lead to longer service life.
- Benefit of Built-in Cylinder: The cylinder is connected to chunk itself directly for obtaining better stability,less space,and higher machining efficiency.
SPECIFICATIONS
Unit / mm
MODEL/SPEC. |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
O |
P |
MB-06 |
228 |
173 |
45 |
16 |
118 |
158 |
40 |
73 |
20 |
12 |
31 |
18 |
4-Ø11 (PCDØ202) |
M10 x 1.5P |
3-M8 x 1.25P (PCDØ134) |
MB-08 |
270 |
215 |
52 |
17 |
130 |
172.5 |
42 |
95 |
25 |
14 |
35 |
18 |
4-Ø11 (PCDØ243) |
M10 x 1.5P |
3-M10 x 1.5P (PCDØ150) |
MB-10 |
315 |
256 |
75 |
19 |
146 |
190.5 |
46 |
110 |
30 |
16 |
40 |
18 |
4-Ø13 (PCDØ285) |
M12 x 1.75P |
3-M12 x 1.75P (PCDØ182) |
MODEL/SPEC. |
Q |
Piston Area (cm2) |
Plunger Stroke (mm) |
Jaw Stroke (Diameter) (mm) |
Max.Gripping Force kgf (KN) |
Max.Hydr. Pressure kgf/cm2 |
Gripping Range |
Gripping Force At Air Pressure 7kgf/cm2 (0.7Mpa) kgf (KN) |
Weight (kg) |
MB-06 |
-- |
97 |
12 |
5.5 |
5040 |
(49.4) |
20 (2.0) |
Ø20~Ø173 |
1450(14.2) |
21.7 |
MB-08 |
3-M10×1.5P ( PCDØ186) |
156 |
16 |
7.4 |
8100 |
(79.4) |
20 (2.0) |
Ø25~Ø215 |
2350(23.0) |
35.5 |
MB-10 |
3-M12×1.75P ( PCDØ232) |
226 |
19 |
8.8 |
12330 |
(120.9) |
21 (2.1) |
Ø37~Ø256 |
3400(33.3) |
54 |
OPERATION EXAMPLE
Examples of Attaching Pneumatic Manual Switch/ Optional Accessories
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
- Rust-proof for Pneumatic Cylinder?Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
- Dusts-proof and Waterproof? Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
- Heavy Duty Clamping Design?Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor't deform.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
C |
D |
E |
F Max. |
F min. |
G Max. |
G min. |
H |
I |
K |
M |
PLVE-06 |
224 |
169 |
M10x1.5P(PCDØ202) |
17 |
140 |
45.65 |
35.65 |
14.65 |
4.65 |
70 |
- |
35 |
Ø11(PCD 202) |
PLVE-08 |
265 |
210 |
M10x1.5P(PCDØ243) |
17 |
154 |
57.15 |
47.15 |
16.15 |
6.15 |
84 |
26 |
40 |
Ø11(PCD 243) |
PLVE-10 |
315 |
254 |
M12x1.75P(PCDØ285) |
20 |
185 |
67.6 |
51.6 |
21.6 |
5.6 |
100 |
32 |
50 |
Ø13(PCD 285) |
MODEL / SPEC. |
N max. |
N min. |
P |
Q |
Piston Area (cm2) |
Plunger Stroke (mm) |
Jaw Stroke [Diameter] (mm) |
PLVE-06 |
56.69 |
54.01 |
3-M6x1P(PCDØ80) |
3-M6x1P(PCDØ120) |
91 |
10 |
5.3 |
PLVE-08 |
69.56 |
66.88 |
3-M10x1.5P(PCDØ136) |
3-M10x1.5P(PCDØ186) |
160 |
10 |
5.3 |
PLVE-10 |
87.44 |
81.61 |
3-M12x1.75P(PCDØ170) |
3-M12x1.75P(PCDØ230) |
215 |
16 |
11.6 |
MODEL / SPEC. |
Max. Gripping Force kgf (KN) |
Max. Pressure Setting kgf/cm2 (Mpa) |
Gripping Force At Air Pressure 7kgf/cm2 (0.7Mpa) kgt (KN) |
Gripping Range |
PLVE-06 |
2950 (29) |
16 (1.57) |
1270 (12.5) |
Ø35~Ø160 |
PLVE-08 |
4890 (48) |
15 (1.47) |
2240 (22) |
Ø40~Ø210 |
PLVE-10 |
4990 (49) |
16 (1.57) |
2140 (21) |
Ø50~Ø254 |
OPERATION EXAMPLE
- When the chuck is rotating continuously: Higher rotation speed to fit with more kind of working,the rotating speed has to be within the max speed limit.
- Built in Check Valve: Design with built in Check Valve.It's doesn't need to supply the air continuously and remain low working torque also reduce the air consumption.
- Dustproof and drainage patent structure: Can prevent the metal chips and coolant get into chuck inside while processing, and maintain.
- Integral pneumatic cylinder: Connect chuck and built-in cylinder to each other directly;thus enables operation stability. Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.
- Rustproof treated cylinder: The cylinder won't get rusty and seized even wet or high moisture working environment.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
RTS-05 |
140 |
85 |
16 |
60 |
6 |
182 |
33.6 |
62 |
14 |
10 |
25 |
6-M8 x 1.25P |
RTS-06 |
170 |
93 |
20 |
80 |
7 |
215 |
40.4 |
73 |
20 |
12 |
31 |
6-M8 x 1.25P |
RTS-08 |
215 |
112 |
30 |
110 |
8 |
255 |
42.4 |
95 |
25 |
14 |
35 |
6-M10 x 1.5P |
RTS-10 |
255 |
120 |
43 |
140 |
8 |
300 |
46.4 |
110 |
30 |
16 |
40 |
6-M10 x 1.5P |
RTS-05T |
140 |
85 |
16 |
60 |
6 |
182 |
33.6 |
62 |
14 |
10 |
25 |
6-M8 x 1.25P |
RTS-06T |
170 |
93 |
20 |
80 |
7 |
215 |
40.4 |
73 |
20 |
12 |
31 |
6-M8 x 1.25P |
MODEL / SPEC. |
M |
N max. |
N min |
O max. |
O min |
P |
R |
Thru-Hole(Diameter)(mm) |
Piston Area (cm2) |
Plunger Stroke (mm) |
Pressure Setting Range kgf/cm2 (Mpa) |
Weight (kg) |
RTS-05 |
PCDØ118 |
26.93 |
24.62 |
20.05 |
6.55 |
18.5 |
6-M6×1P (PCDØ92) |
16 |
74 |
10 |
2 - 7 |
0.2-0.7 |
10 |
RTS-06 |
PCDØ147 |
36.46 |
33.69 |
21.55 |
15.55 |
18.5 |
6-M8×1.25P (PCDØ120) |
20 |
120 |
13 |
2 - 7 |
0.2-0.7 |
16.8 |
RTS-08 |
PCDØ185 |
44.92 |
41.52 |
29.55 |
17.55 |
19.5 |
6-M10×1.5P (PCDØ155) |
30 |
190 |
16 |
2 - 7 |
0.2-0.7 |
30.6 |
RTS-10 |
PCDØ220 |
53.63 |
49.59 |
36.55 |
17.05 |
21.5 |
6-M12×1.75P (PCDØ190) |
43 |
280 |
19 |
2 - 7 |
0.2-0.7 |
45.1 |
RTS-05T |
PCDØ118 |
26.93 |
24.62 |
20.05 |
6.55 |
18.5 |
2-M6×1P (PCDØ92) |
16 |
74 |
10 |
2 - 7 |
0.2-0.7 |
9.7 |
RTS-06T |
PCDØ147 |
36.46 |
33.69 |
21.55 |
15.55 |
18.5 |
2-M8×1.25P (PCDØ115) |
20 |
120 |
13 |
2 - 7 |
0.2-0.7 |
16.3 |
MODEL / SPEC. |
Jaw Stroke(Diameter) (mm) |
Max.Speed (min-1) |
Gripping Force At Air Pressure 7kgf/cm2 (0.7Mpa) |
Gripping Range |
kgf |
(KN) |
RTS-05 |
4.6 |
450 |
1340 |
(13.1) |
Ø4-Ø136 |
RTS-06 |
5.5 |
350 |
2330 |
(22.8) |
Ø25-Ø166 |
RTS-08 |
6.8 |
300 |
3730 |
(36.5) |
Ø33-Ø215 |
RTS-10 |
8.0 |
250 |
5480 |
(53.7) |
Ø43-Ø255 |
RTS-05T |
4.6 |
450 |
1340 |
(13.1) |
Ø4-Ø136 |
RTS-06T |
5.5 |
350 |
2330 |
(22.8) |
Ø25-Ø166 |
OPERATION EXAMPLE
It's ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that chuck rotates with the spindle of indexing table or rotary table.
- The chuck is designed for intermittently rotate in limited rotary speed with rotary table.
- Rustproof treated cylinder : The cylinder won't get rusty and seized even in wet or hign moisture working environment.
- Integral pneumatic cylinder :Connect chuck and built-in cylinder to each other directly;thus enables operation stability.Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
RT-05 |
140 |
85 |
16 |
60 |
6 |
182 |
33.6 |
62 |
14 |
10 |
25 |
6-M8×1.25P |
RT-06 |
170 |
93 |
20 |
80 |
7 |
215 |
40.4 |
73 |
20 |
12 |
31 |
6-M8×1.25P |
RT-08 |
215 |
112 |
30 |
110 |
8 |
255 |
42.4 |
95 |
25 |
14 |
35 |
6-M10×1.5P |
MODEL / SPEC. |
M |
Nmax. |
Nmin. |
O max. |
O min. |
P |
Q |
R |
Thru-Hole (Diameter) mm |
Piston Area (cm2) |
Plunger Stroke (mm) |
Jaw Stroke (Diameter) mm |
RT-05 |
PCDØ118 |
26.93 |
24.62 |
20.05 |
6.55 |
26 |
- |
3-M8×1.25P (PCDØ92) |
16 |
74 |
10 |
4.6 |
RT-06 |
PCDØ147 |
36.46 |
33.69 |
21.55 |
15.55 |
26 |
- |
3-M10×1.5P (PCDØ130) |
20 |
120 |
13 |
5.5 |
RT-08 |
PCDØ185 |
44.92 |
41.52 |
29.55 |
17.55 |
27 |
3-M10×1.5P (PCDØ186) |
3-M10×1.5P (PCDØ146) |
30 |
190 |
16 |
6.8 |
MODEL / SPEC. |
Max.Speed r.p.m (min-1) |
Max. Pressure kgf/cm2 (Mpa) |
Gripping Force At Air Pressure 7kgf/cm2 (0.7Mpa) kgf (KN) |
Gripping Range |
RT-05 |
51 |
7 (0.7) |
1340 (13.1) |
Ø4-Ø140 |
RT-06 |
41 |
7 (0.7) |
2330 (22.8) |
Ø25-Ø170 |
RT-08 |
33 |
7 (0.7) |
3730 (36.5) |
Ø33-Ø215 |
OPERATION EXAMPLE
2 actuating axes self-centering solid air chuck fixtures is great for machining center. Two pairs of jaws clamp one after another to assure a workpiece to be locked completely.
- Rust-proof for Pneumatic Cylinder? Inside wall of cylinder being rustproof treated? cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
- Dusts-proof and Waterproof? Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
- 4-jaw Clamping and Self-centering? 4-jaw clamping are steadier for machining. Two pairs of jaws are moved independently to assure complete lock and self-centering.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
N |
MA-06 |
224 |
175 |
20 |
130 |
170 |
40 |
73 |
20 |
12 |
31 |
18 |
Ø11 |
Ø202 |
MA-08 |
265 |
210 |
22 |
154 |
196 |
42 |
95 |
25 |
14 |
35 |
18 |
Ø11 |
Ø243 |
MA-10 |
315 |
250 |
25 |
176 |
222 |
46 |
110 |
30 |
16 |
40 |
18 |
Ø13 |
Ø285 |
MODEL / SPEC. |
O |
P |
Q |
A Piston Area (cm2) |
Push Side |
Pull Side |
MA-06 |
M10×1.5P ( PCDØ202) |
4- M8×1.25P ( PCDØ124) |
4- M8×1.25P ( PCD Ø156) |
127 |
108 |
MA-08 |
M10×1.5P ( PCDØ243) |
4- M10×1.5P ( PCDØ140) |
4- M10×1.5P ( PCD Ø186) |
184 |
157 |
MA-10 |
M12×1.75P ( PCDØ285) |
4- M10×1.5P ( PCDØ176) |
4- M10×1.5P ( PCD Ø224) |
270 |
239 |
MODEL / SPEC. |
B Piston Area (cm2) |
Plunger Stroke (mm) |
Jaw Stroke (Diameter) mm |
Gripping Force At Air Pressure 7kgf/cm2(0.7Mpa) |
Weight (kg) |
Gripping Range |
Push Side |
Pull Side |
kgf |
(KN) |
MA-06 |
122 |
117 |
12 |
5.5 |
4500 |
(44) |
24.8 |
Ø25~Ø175 |
MA-08 |
176 |
169 |
16 |
7.4 |
6400 |
(63) |
41.3 |
Ø30~Ø210 |
MA-10 |
254 |
241 |
19 |
8.8 |
9500 |
(93) |
65.6 |
Ø35~Ø250 |
OPERATION EXAMPLE
- Pre-machined tapped holes and lubrication path? There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
- Built-in Cylinder? Connect cylinder directly to the chuck for stable gripping.
- Precise soft jaw positioning?It’s easy to remount soft jaw to the correct position with dowel pins on it.
- High gripping precision brings better quality and efficiency?Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree machining processes can be simplified or shortened to make high precision machining with high efficiency come ture.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
C |
D |
E |
D1 |
d (H7) |
D2 |
H |
h |
W |
M1 |
TK-04 |
20.75 |
12.7 |
12.7 |
101.6 |
30 |
82.55 |
18 |
25 |
70.3 |
3.2 |
16 |
6-M5×0.8P(PCD Ø88.9) |
TK-06 |
39.75 |
12.7 |
12.7 |
152.4 |
40 |
124.97 |
26 |
34.5 |
70.3 |
3.2 |
22 |
6-M6×1P(PCD Ø135.89) |
TK-08 |
65.75 |
25.4 |
- |
203.2 |
45 |
167.64 |
50 |
50 |
99.5 |
7.0 |
25 |
6-M10×1.5P(PCD Ø182.88) |
TK-04T |
20.75 |
12.7 |
12.7 |
101.6 |
30 |
82.55 |
18 |
25 |
70.3 |
3.2 |
16 |
6-M5×0.8P(PCD Ø88.9) |
TK-06T |
39.75 |
12.7 |
12.7 |
152.4 |
40 |
124.97 |
26 |
34.5 |
70.3 |
3.2 |
22 |
6-M6×1P(PCD Ø135.89) |
TK-08T |
65.75 |
25.4 |
- |
203.2 |
45 |
167.64 |
50 |
50 |
99.5 |
7.0 |
25 |
6-M10×1.5P(PCD Ø182.88) |
MODEL / SPEC. |
M2 |
M3 |
T1 |
T2 |
T3 |
R1 |
TK-04 |
6-M5×0.8P |
9-Ø3.18 |
3-M5×0.8P(PCD Ø88.9) |
? |
? |
30° |
TK-06 |
12-M5×0.8P |
9-Ø3.18 |
3-M6×1P(PCD Ø135.89) |
3-M6×1P(PCD Ø110) |
3-M6×1P(PCD Ø135.89) |
30° |
TK-08 |
6-M10×1.5P |
6-Ø6.36 |
3-M8×1.25P(PCD Ø182.88) |
3-M8×1.25P(PCD Ø150) |
3-M8×1.25P(PCD Ø100) |
30° |
TK-04T |
4-M5×0.8P |
6-Ø3.18 |
2-M5×0.8P (PCDØ70) |
- |
- |
- |
TK-06T |
8-M5×0.8P |
6-Ø3.18 |
2-M6×1P (PCDØ110) |
- |
- |
- |
TK-08T |
4-M10×1.5P |
4-Ø6.36 |
2-M8×1.25P (PCDØ150) |
- |
- |
- |
MODEL / SPEC. |
R2 |
R3 |
Jaw Stroke (Diameter) mm |
Gripping Force At Air Pressure 7 kgf/cm2 (0.7Mpa) |
Max. Speed r.p.m (min-1) |
Weight (kg) |
TK-04 |
- |
- |
3 |
800 (7.8) |
4500 |
4.4 |
TK-06 |
30° |
75° |
3 |
1200 (11.7) |
4200 |
9.8 |
TK-08 |
30° |
30° |
3 |
1800 (17.6) |
2500 |
26.3 |
TK-04T |
- |
- |
3 |
800 (7.8) |
3500 |
4.2 |
TK-06T |
- |
- |
3 |
1200 (11.7) |
3500 |
9.5 |
TK-08T |
- |
- |
3 |
1800 (17.6) |
2000 |
25.1 |
With built-in type cylinder, it is ideal for machining application on working table.
- Pre-machined tapped holes and lubrication path? There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
- Built-in Cylinder? Connect cylinder directly to the chuck for stable gripping.
- Precise soft jaw positioning?It’s easy to remount soft jaw to the correct position with dowel pins on it.
- High gripping precision brings better quality and efficiency?Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree machining processes can be simplified or shortened to make high precision machining with high efficiency come ture.
DIMENSIONS
SPECIFICATIONS
Unit / mm
MODEL / SPEC. |
A |
B |
C |
D |
d (H7) |
E |
F |
H |
W |
L |
M |
MTK-04 |
148 |
17 |
20.75 |
101.6 |
18 |
12.7 |
12.7 |
80 |
16 |
13 |
Ø9 (PCDØ130) |
MTK-06 |
200 |
18 |
39.75 |
152.4 |
26 |
12.7 |
12.7 |
81 |
22 |
18 |
Ø11 (PCDØ180) |
MTK-04T |
148 |
17 |
20.75 |
101.6 |
18 |
12.7 |
12.7 |
80 |
16 |
13 |
Ø9 (PCD Ø130) |
MTK-06T |
200 |
18 |
39.75 |
152.4 |
26 |
12.7 |
12.7 |
81 |
22 |
18 |
Ø11 (PCDØ180) |
MODEL / SPEC. |
M1 |
M2 |
M3 |
N |
T1 |
T2 |
T3 |
MTK-04 |
6- M5×0.8P(PCDØ88.9) |
6-M5×0.8P |
9-Ø3.18 |
3-M8×1.25P |
3-M5×0.8P (PCDØ88.9) |
- |
- |
MTK-06 |
6-M6×1P(PCDØ135.89) |
12-M5×0.8P |
9-Ø3.18 |
4-M10×1.5P |
3-M6×1P (PCDØ135.89) |
3-M6×1P (PCD Ø110) |
3- M6×1P (PCD Ø135.89) |
MTK-04T |
6- M5×0.8P(PCDØ88.9) |
4-M5×0.8P |
6-Ø3.18 |
3-M8×1.25P |
2-M5×0.8P (PCDØ70) |
? |
? |
MTK-06T |
6-M6×1P(PCDØ135.89) |
8-M5×0.8P |
6-Ø3.18 |
4-M10×1.5P |
2-M6×1P (PCDØ110) |
? |
? |
MODEL / SPEC. |
Jaw Stroke (Diameter) mm |
Gripping Force At Air Pressure 7 kgf/cm2 (0.7Mpa) |
Weight (kg) |
MTK-04 |
3 |
800 (7.8) |
6.2 |
MTK-06 |
3 |
1200 (11.7) |
13 |
MTK-04T |
3 |
800 (7.8) |
6 |
MTK-06T |
3 |
1200 (11.7) |
12.6 |
OPERATION EXAMPLE
|
|
|
|
|
|
|
|