Hansung Precision Co., Ltd.
Hansung Precision Co., Ltd., which has accumulated technology and know-how for more than 30 years since its establishment in 1985, specializes in coolant pumps for machine tools, oil and grease lubrication pumps for industrial machines, including machine tools and injection molding machines. Hansung Precision Co., Ltd., using the "HALS" brand, is the first company to produce centralized automatic lubrication pump and high pressure precision lubrication system. Our centralized oil and grease lubrication pumps, coolant pumps and rotor pumps, which have high compatibility and reliability with domestic and foreign products, function as core devices not only for machine tools but also for industrial machines.
Since Korea first exported auto lubrication pumps to Japan and Taiwan in the early 1990s, we have been exporting lubrication pumps and coolant pumps under the "HALS" brand to many countries including Japan. In addition, our production system and high technology are recognized worldwide by ISO 9001, ISO 14001, CE and NRTL certification. As a result, we continue to grow, while maintaining our trust in domestic companies and exporting to many countries around the world. Hansung Precision Co., Ltd. will share the future of global manufacturing industry with unremitting efforts and investments in the development of new technologies without having to settle for customers' trust and market share.
-
-
-
HCP F(High Pressure) series
-
-
-
-
-
-
HCS Suction Filter series
Model
Structure
· A single-unit small self-priming pump
· A pipe is connected to the suction part to suck in oil.
Feature
- A compact, lightweight single-unit pump.
- The small, design means less installation limitations
- Prolonged idling is prohibited due to the installed mechanical seal. (Idling for more than 30 seconds is prohibited)
- Sufficient quantities of oil need to be supplied to the self priming compartment before use.
Performance Curve
* When using non water-soluble cutting fluid, Viscosity must be under 32cSt. Pump performance (pressure and quantity) will decrease compared to water-solube cutting fluid.
External Figure
Dimension
? LA, LB ( ) are products for export
Model
Structure
· A pump that operates with the pump part submerged in the tank.
· Different pumps can be selected according to tank depths, and can be used without separate oil priming.
Feature
- The motor and the pump have the same shaft but are separated.
- Various selections can be made according to the depths of the compact low-set tanks
- A structure with no additional seals such as a mechanical seal
- Can be applied to a wide range of parts including grinding machine with mixed abrasive grain.
Performance Curve
* When using non water-soluble cutting fluid, Viscosity must be under 32cSt. Pump performance (pressure and quantity) will decrease compared to water-solube cutting fluid.
External Figure
HCP F(High Pressure) series
Model
Structure
· A submerged-type pump with the same structure as the HCP-F type.
· There are various pump forms according to the different tank depths.
Feature
- It has the same separate motor & pump structure as the HCP-F
- It is used when more pressure than HCP-F is required.
- There is an anti-vortex part at the top of the pump, which allows smooth suction.
- The pump is divided into top section suction or bottom section Suction according to the type of the applied tank.
- HCP-419F,420F are bottom section suction products that have a wide range of suction oil levels.
Performance Curve
* When using non water-soluble cutting fluid, Viscosity must be under 32cSt. Pump performance (pressure and quantity) will decrease compared to water-solube cutting fluid.
External Figure
Model
Feature
- HCP-?MF(S)
· It can be applied when large quantities of oil are required
· The motor part is detached to reduce the transfer of heat
· A submerged bottom section suction pump that must be kept at least 30mm above the tank floor.
· The pump part is detached to reduce the entry of oil into the motor.
- HCP-?EMF(S)
· High efficiency motor is installed in HCP-MF(S) Type
· Excellent electricity savings and high economic return on investment through optimized efficiency
· Increase in life-time use through slow temperature increase and use of highly energy-efficient energy materials
· Acquired high efficiency energy equipment mark (IE3)
Performance Curve
* When using non water-soluble cutting fluid, Viscosity must be under 32cSt. Pump performance (pressure and quantity) will decrease compared to water-solube cutting fluid.
External Figure
-
-
-
HMTP-3M-MA(VB)/3M-HAVB(VD) series
-
-
-
-
-
Model
Structure
· An internal gear bulk pump. It is small compared to external gear pumps, and can be connected to motor drive parts to operate the pump.
Feature
- A volume pump that allows precise fluid delivery according to the rev counts
- It has a wide flow range according to the rev counts
- A relief valve can be added to allow easy pressure setting adjustments.
HGP 10?MG
Cartridge Exclusive Grease
Model
Circuit Diagram
Feature
· Compact and lightweight design with built-in depressurization features for the supply of quantitative grease
· This grease pump is assembled with the metering valve and discharges the quantity of grease on time.
· Easy to replace cartridge to recharge grease, maintaining a clean environment
· A grease pump that is designed to be excellent at lubrication points, such as the LM guide and ball screw
· Designated grease (NLGI Grade 000, 00, 0, 1) using pump
External Figure
HGP 16 series
Compeact Elextric Grease Pump Type
Model
Feature
HGP-16 type is a reduction motor-driven grease pump that supplements the problems of existing large pumps, and is a compact and powerful controller-equipped grease pump.
· It is compact, lightweight and affordable.
· A controller-equipped grease pump.(HGP-(?))
· It has to used with a multi-stage distributor combination.
· For use in two line systems, it is used in conjunction with change over valves.
? If there is no discharge, remove air by opening the air vent plug's plug. ? Grease level switch is an order specification ? HGP-16(S) is an order specification used for external control.
HGP-?E > for external control HGP-16 Etype has the same pump structure as the traditional HGP-O, but uses an external control method rather than an internal controller to increase the user's range of choices.
Model
Feature
MG-10, the forced oil supply manual grease pump, adopts a concentrated lubricating oil supply method to allow suitable planning of oil supply quantities, and increases productivity through reduced oil supply costs and machine stoppage time. The elimination of risks that can happen during grease injections allows safer management of oil supply. - It allows suitable planning of oil supply quantities, and the use of a HU-R type grease spray allows multi-stage oil supply. - It can extend the lifespan of machines and bearings. - It can prevent the entry of contaminated grease. - If there is no grease discharge, unscrew the air vent screw(-) and remove the air inside the body.
External Figure
Model
Feature
The HM pump is a compact manual grease pump, and is used to supply smaller discharge quantities compared to automatic pumps, and is applied to systems with relatively small lubricating oil supplies. The maximum discharge pressure is divided into 100kg/cm² or 210kg/cm² depending on the quantity of discharge, and the tank is separated into a 2liter or a 4liter. Exchange of the discharge part's block allows attachments of switching sides when applying single line and two line. The simple operation method means less breakdowns, and easier repairs and maintenance.
Product Description
Structure
· A single-unit small self-priming pump · A pipe is connected to the suction part to suck in oil.
Feature
1. A compact, lightweight single-unit pump.
2. The small, design means less installation limitations
3. Prolonged idling is prohibited due to the installed mechanical seal. (Idling for more than 30 seconds is prohibited)
4. Sufficient quantities of oil need to be supplied to the self priming compartment before use.
Pump Spec
Packing Spec
MODEL NAME | PACKING SIZE(cm) | WEIGHT(kg) |
PUMP | PACKING |
HCP-60S |
18(W) x 16(L) x 26(D) |
8 |
9 |
HCP-100S |
HCP-120S |
HCP-180S |
26(W) x 21(L) x 21(D) |
11 |
12 |
HCP-250S |
26(W) x 22(L) x 23(D) |
12 |
13 |
HCP-400S |
34(W) x 22(L) x 23(D) |
16 |
17 |
Performance Curve
* When using non water-soluble cutting fluid, Viscosity must be under 32cSt. Pump performance (pressure and quantity) will decrease compared to water-solube cutting fluid.
External Figure
Dimension ? LA, LB ( ) are products for export
|