จำหน่ายสินค้าของทาง Arobotech AUTO REST
จำหน่ายและนำเข้าสินค้าของทาง Arobotech AUTO REST AROBOTECH STEADY REST สนใจติดต่อได้ที่คุณภูรินทร์ 098-4288648 LINE ID : 0984288648
Runout Arbors for lathe Centers
TAC Rockford runout arbors for lathe centers are manufactured using hardened gauge-quality steel, and include a certificate of accuracy.
MicroCentric Air Chuck
Quick Change Collet Chucks Precision Air Chucks Precision Power Chucks Conventional Collet Chucks Diaphragm Chucks KSF Power Chucks SPECIAL TURNKEY WORKHOLDING SYSTEMS สนใจสินค้าสอบถามที่เบอร์ 0984288648 คุณภูรินทร์
Last Update : 24/02/2024 08:04:43
เครื่องวัดแรงดึง ForceCheck for Spindel Machine
เครื่องวัดแรงดึง DRAWBAR CLAMPING FORCE GAGE Spindle Drawbar Force Gauge Drawbar Gauge Spindle Clamping Force Force Check KM6350 KM10080 Spindle Draw Bar force gauge testing CNC DrawBar Gauge Tool Clamping Force Clamp Force Meter Drawbar Force Gauge
KELCH Safecontrol 4.0 Force Check
KELCH Safecontrol 4.0 Force Check for spindle force BT30 BT40 BT50 HSK25 HSK32 HSK40 HSK50 HSK63 HSK100
Last Update : 24/07/2023 15:36:12
ForceCheck - TAC Rockford
ForceCheck - TAC Rockford ForceCheck HSK Taper Drawbar Force Gauges For measuring drawbar retention force on HSK (Hollow-Shank Taper) standard spindles
Last Update : 23/07/2023 08:40:34
Polygon Solutions Rotary Broach Tools T-40 Torx GO and NOGO Gage Set
Rotary Broaches
Rotary Broach Tool Holders
Go & NoGo Gages
Torx Rotary Broaches
Rotary Broach Tool Holders
Go & NoGo Gages
Hexagon (Hex) Go/NoGo Gages
Square Go/No-Go Gauges
Hexalobular Go/NoGo Gages
T-40 Torx GO and NOGO Gage Set
Brand : Pneumatic rotary tables
Pneumatic rotary tables กระบอกลมแบบหมุนล็อคตำแหน่งโดยใช้ลม G.P.A. Italiana pneumatic rotary indexing tables are available in two versions: TAR 270 and TAR 160 ขนาดโต๊ะหมุนมีสองแบบ 160 mm 270 mm
POWER-CHECK 2 OTT-JAKOB Power-Check 2 Clamping force monitoring device Power-Check 2 OTT-JAKOB Spanntechnik GmbH OTT-JAKOB HSK Gripper Pull Force Test Using Power Check 2 OTT-JAKOB Power-Check 2
POWER-CHECK
TRUST IS GOOD. MEASURING IS BETTER.
In machine tool technology, monitoring pull-in force as part of quality assurance is essential in order to guarantee consistently precise machining results. Too low clamping force can have a long-term impact:
OTT-JAKOB Power-Check 2 is a testing device which measures the pull force of clamping systems. Four basic versions of the device are available, ensuring optimal measurement precision for every interface.
OTT-JAKOB has the right exchangeable adapter for all common tool interfaces. The product range also includes adapters with gripper grooves which make it possible to automatically switch in the tool from the magazine position. The Power-Check 2 can store up to 4,000 data sets which can easily be read out over a USB interface using the software supplied with the system. The built-in adjustable sleeve allows the user to account for tool tolerances during the measurement process. At the same time, this function can also be used to simulate the minimum and maximum tolerances of tools required to program the clamping system position monitor.
Here you can find more detailed information and documents about this product:
POWER-CHECK MAGAZINE
Fully automated pull-in force measurement – with the Power-Check Magazine The Power-Check Magazine is a cost-effective solution from OTT-JAKOB which is designed to check pull force. The measurements are sent to the RS485 bus antenna over a wireless connection. This characteristic makes the device ideal for taking measurements in inaccessible machines and for automation in the sense of Industry 4.0.
Unlike Power-Check 2, the Power-Check Magazine adapter is not exchangeable. The device is delivered as a single unit. The excellent two-year battery life and its capacity for up to 30,000 measurements are the reason for its excellent longevity. The protective case with IP67 rating ensures that the Power-Check Magazine functions reliably even in the most challenging conditions.
Here you can find more detailed information and documents about this product:
In machine tool technology, monitoring pull-in force as part of quality assurance is essential in order to guarantee consistently precise machining results. Too low clamping force can have a long-term impact:
OTT-JAKOB Power-Check 2 is a testing device which measures the pull force of clamping systems. Four basic versions of the device are available, ensuring optimal measurement precision for every interface.
OTT-JAKOB has the right exchangeable adapter for all common tool interfaces. The product range also includes adapters with gripper grooves which make it possible to automatically switch in the tool from the magazine position. The Power-Check 2 can store up to 4,000 data sets which can easily be read out over a USB interface using the software supplied with the system. The built-in adjustable sleeve allows the user to account for tool tolerances during the measurement process. At the same time, this function can also be used to simulate the minimum and maximum tolerances of tools required to program the clamping system position monitor.
Here you can find more detailed information and documents about this product:
In machine tool technology, monitoring pull-in force as part of quality assurance is essential in order to guarantee consistently precise machining results. Too low clamping force can have a long-term impact:
OTT-JAKOB Power-Check 2 is a testing device which measures the pull force of clamping systems. Four basic versions of the device are available, ensuring optimal measurement precision for every interface.
OTT-JAKOB has the right exchangeable adapter for all common tool interfaces. The product range also includes adapters with gripper grooves which make it possible to automatically switch in the tool from the magazine position. The Power-Check 2 can store up to 4,000 data sets which can easily be read out over a USB interface using the software supplied with the system. The built-in adjustable sleeve allows the user to account for tool tolerances during the measurement process. At the same time, this function can also be used to simulate the minimum and maximum tolerances of tools required to program the clamping system position monitor.
Here you can find more detailed information and documents about this product:
In machine tool technology, monitoring pull-in force as part of quality assurance is essential in order to guarantee consistently precise machining results. Too low clamping force can have a long-term impact:
OTT-JAKOB Power-Check 2 is a testing device which measures the pull force of clamping systems. Four basic versions of the device are available, ensuring optimal measurement precision for every interface.
OTT-JAKOB has the right exchangeable adapter for all common tool interfaces. The product range also includes adapters with gripper grooves which make it possible to automatically switch in the tool from the magazine position. The Power-Check 2 can store up to 4,000 data sets which can easily be read out over a USB interface using the software supplied with the system. The built-in adjustable sleeve allows the user to account for tool tolerances during the measurement process. At the same time, this function can also be used to simulate the minimum and maximum tolerances of tools required to program the clamping system position monitor.
Here you can find more detailed information and documents about this product: