|
|
|
Page View 451 |
Product Information : |
|
Product Name: |
|
HALS Lube Pump |
|
Product Category: |
|
เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
|
Product Sub-Category: |
|
HALS HANSUNG PRECISION
|
Brand: |
|
HALS Lube Pump |
Product Type : |
|
สินค้า, ผลิตภัณฑ์
|
Short Description : |
|
HALS Lube Pump |
|
|
|
|
Lube Pump
-
HMGP-303
-
HMGP-6N
-
HMGP-205S
HMGP 303 & 303D
Internal Control Fixed Quantity Oil Supply Pump
Model
Feature
- A gear type volume pump that allows precise delivery across a wide range of viscosities.
- It can be applied to long distances of more than 20m, and can also be used in small, large machine tools and high-precision machines.
- To make full use of the fixed quantity oil supply system, the HMV series needs to be used for the valve.
- It has an internal control, and therefore does not require separate control devices.
- It has a built-in ullage decrease detector. (Float switch)
Components
External Figure
Operating Guide
- The pump operates once power is connected and electricity is supplied. You can set the pause time using the Interval ? on the front of the pump, and discharge ? to set the operating time (seconds). Afterwards, the pump will repeatedly operate and pause
- Minimum pause time of the pump is 3 minutes, and the minimum discharge time can be set to 3 seconds.
- When operating the pump, the DIS, lamp ? switches on, and during the pause, the INT lamp ? switches on. When ullage inside the tank decreases, the EMG, lamp ? switches on. When ullage inside the tank decreases, the EMG lamp ? switches on.
- The MAN. button ? can be used for test operations and to let air out from the pipes
(But, do not operate more than 5 minutes, as it can cause Motor damage)
- The pump is set at 17kg/cm when released from the factory, but this may differ depending on the changes in the viscosities of the oils used (oil viscosity, surrounding temperature).
Hydraulic circuit drawing
Wiring Diagram
HMGP 6N & 6C
Internal Control or External Control Proportional Oil Supply Pump
Model
Feature
- It is the most suitable pump for proportional oil supply, and can be applied to a wide range of industrial fields
- It has a simple structure and excellent durability
- Internal control (6N) or External control (6C) are available.
- It is equipped with a ullage decrease detector tovincrease reliability.
- It is equipped with a dustproof device, and can be used in presses that are subjected to vibrations and impacts.
- A line filter and a drain filter are used side by side, allowing oil reuse.
- To fully utilize the proportional oil supply system, you must use the HJB series valve.
Components
External Figure
Operating Guide
- The pump operates once power is connected and electricity is supplied. You can set the pause time using the Interval ? on the front of the pump, and discharge ? to set the operating time (seconds). Afterwards, the pump will repeatedly operate and pause.
- Minimum pause time of the pump is 1 minute, and the lowest discharge can be set to 4cc.
- When operating the pump, the DIS, lamp ? switches on, and during the pause, the INT, lamp ? switches on. When ullage inside the tank decreases, the EMG lamp ? switches on.
- The MAN, button ? can be used for test operations and to let air out from the pipes. (But, do not operate more than 5 minutes, as it can cause motor damage.)
- The pump is set at 16kg/cm when released from the factory, but this may differ depending on the changes in the viscosities of the oils used soil viscosity, surrounding temperature).
Hydraulic circuit drawing
Wiring Diagram
HMGP 303 & 303D
Internal Control Fixed Quantity Oil Supply Pump
Model
Feature
- A gear type volume pump that allows precise delivery across a wide range of viscosities.
- It can be applied to long distances of more than 20m, and can also be used in small, large machine tools and high-precision machines.
- To make full use of the fixed quantity oil supply system, the HMV series needs to be used for the valve.
- It has an internal control, and therefore does not require separate control devices.
- It has a built-in ullage decrease detector. (Float switch)
PUMP SPEC
HALS 33
Piston Manual Pump
Model
Feature
A piston manual pump with a specially processed cylinder interior to raise the pump discharge pressure to 7kg/cm2 for a smooth supply of lubricating oil. Also compact and lightweight, requiring little installation space, and is therefore very economical.
External Figure
HMGP 6A & 6MA
Air Drive Fixed Quantity / Proportional Oil Supply Pump
Model
Feature
- HMGP-6A
- Easy lubricating oil supply through supplying compressed air - The pump drive parts are produced with die casting molds for superior durability - Easy control bar operation for free control of the quantity of discharge - The attached suction filter on every model prevents suction of foreign substances
- HMGP-6MA
- A fixed quantity oil supply pump used with the HMV Series fixed quantity valve - It is capable of long distance delivery.
External Figure
Operating Guide
- HMGP-6A Oil quantity adjustment The oil quantity can easily be adjusted by turning the control bar
- The pump operation time needs to be adjusted by attaching a Sol V/V at the air adulteration section.
|
|
|
|
|
|
|
|